RE: [cisco-ttl] sh isdn status

From: Mehmet Ugur Hazirol <m_u_g_u_r_at_....>
Date: Fri, 2 Jan 2009 00:41:36 -0800 (PST)


Selamlar..
BRI kartlar voice interface olarak tanimlandigi icin encapsulation set edemiyorum.. isdn swtich-type parametresini basic-5ess yaptigimda ise hic arama yapilamiyor..Mevcut durumda arama yapilabiliyor ancak karsi taraf telefonu actiginda cagri kesiliyor...

Ayrica benim merak ettigim konu sh isdn status ciktisinda neden iki adet tei satiri goruyorum? Bu satirlardan bir tanesi ok iken digeri problemli gorunuyor...

Herkese mutlu ve saglikli yillar...

mugur

Mehmet bey encapsulation ve isdn switch-type parametreleri ile oynamayı denediniz mi ?
encapsulation'ı ppp isdn switch-type'ıda basic-5ess yapıp test edebilir misiniz.  

interface BRI0/1/0 no ip address encapsulation ppp isdn switch-type basic-5ess isdn point-to-point-setup no cdp enable    

Salim Sisman
Network Specialist

To: cisco-ttl_at_yahoogroups.comFrom: m_u_g_u_r_at_yahoo.comDate: Tue, 30 Dec 2008 03:58:00 -0800Subject: [cisco-ttl] sh isdn status

Selamlar...BRI uzerinden PBX baglantili bir lokasyonda VoIP calistirmak istiyoruz..PBX ve router fiziksel baglantisi OK. Ancak sh isdn status ciktisindan asagidaki gibi birden fazla TEI satiri goruyorum...Bunun sebebi hakkinda bilgisi olan varsa paylasabilir mi?(BRI port configlerini de asagiya ekledim..)Tesekkurler, iyi calismalar...Router#sh isdn status Global ISDN

Switchtype = basic-net3ISDN BRI2/0 interface        dsl 1, interface ISDN
Switchtype = basic-net3    Layer 1 Status:        ACTIVE    Layer 2 Status:     
  TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED        TEI = 0,
Ces = 1, SAPI = 0, State = TEI_ASSIGNED    Layer 3 Status:        0 Active Layer
3 Call(s)    Active dsl 1 CCBs = 0    The Free Channel Mask:  0x80000003ISDN
BRI2/1 interface        dsl 2, interface ISDN Switchtype = basic-net3    Layer 1
Status:        ACTIVE    Layer 2 Status:        TEI = 0, Ces = 1, SAPI = 0,
State = MULTIPLE_FRAME_ESTABLISHED        TEI = 0, Ces = 1, SAPI = 0, State =
TEI_ASSIGNED    Layer 3 Status:        0 Active Layer 3 Call(s)    Active dsl 2
CCBs = 0 The Free Channel Mask: 0x80000003 Total Allocated ISDN CCBs = 0!interface BRI2/0 no ip address isdn switch-type basic-net3 isdn overlap-receiving isdn incoming-voice voice isdn static-tei 0!interface BRI2/1 no ip address isdn switch-type basic-net3 isdn overlap-receiving isdn incoming-voice voice isdn static-tei 0end[Non-text portions of this message have been removed]

Show them the way! Add maps and directions to your party invites. http://www.microsoft.com/windows/windowslive/events.aspx

[Non-text portions of this message have been removed]


--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu
tutulamazlar.Yahoo! Groups Links






      

[Non-text portions of this message have been removed]


------------------------------------

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar.Yahoo! Groups Links


<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/cisco-ttl/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/cisco-ttl/join (Yahoo! ID required)
<*> To change settings via email:
mailto:cisco-ttl-digest_at_yahoogroups.com mailto:cisco-ttl-fullfeatured_at_yahoogroups.com
<*> To unsubscribe from this group, send an email to:
cisco-ttl-unsubscribe_at_yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Fri Jan 02 2009 - 20:40:00 CET

This archive was generated by hypermail 2.2.0 : Fri Jan 02 2009 - 20:40:08 CET