[cisco-ttl] Metro Ethernet to GSHDSL Hakkında

From: Huseyin <huseyinada_at_....>
Date: Mon, 27 Aug 2007 12:29:11 -0000


Arkadaslar merhaba,

Bir ucu 10mb me ve c3845 olan bir router (mrk nokta) ile 2 mb gshdsl ve c2801 router (uc nokta) (5 adet) olan star topoloji kurmaya çalışıyorum. ME tarafı acibadem telekomda tanımlı ve her zamanki gibi sorun olmadigi soyleniyor. Uc devrelerim ise 3 u bandirma, 1 avrupa yakasi digeride anadolu yakasinda kurulu. Problemim su; data iletemiyorum. Mrk nokta icin;
 sh run;
interface GigabitEthernet0/0
 no ip address
 duplex auto
 speed auto
 media-type rj45
!

interface GigabitEthernet0/0.1
 description LocalAREA
 encapsulation dot1Q 10
 ip address 172.16.1.30 255.255.255.0
 ip nat inside
 ip virtual-reassembly
!

interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
 media-type rj45
!

interface GigabitEthernet0/1.202
 description Mrk_to_Kumes
 encapsulation dot1Q 202
 ip address 10.6.6.1 255.255.255.252

uc nokta icin;
sh run
controller DSL 0/3/0
 mode atm
 line-term cpe
 line-mode 2-wire line-zero
 dsl-mode shdsl symmetric annex B
 ignore-error-duration 15
 line-rate auto
!
!
!
!
!
!

interface FastEthernet0/0
 ip address 172.16.5.254 255.255.255.0
 duplex auto
 speed auto
!

interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!

interface ATM0/3/0
 no ip address
 no atm ilmi-keepalive
!

interface ATM0/3/0.1 point-to-point
 ip address 10.5.5.2 255.255.255.252
 pvc 0/35
  encapsulation aal5snap
 !
!

ip route 0.0.0.0 0.0.0.0 172.16.5.1

bir fikri olan varmı???? Received on Tue Aug 28 2007 - 23:19:47 CEST

This archive was generated by hypermail 2.2.0 : Tue Aug 28 2007 - 23:19:49 CEST