[cisco-ttl] Re: VLAN sorunu

From: Ozgur Karatas <kaigeek_at_....>
Date: Wed, 11 Apr 2007 10:24:42 -0700 (PDT)


Tekrar selamlar liste sakinleri,
bir onceki sorunumda bahsettigim VLAN sorununu cozdum. Bilgi acisindan buraya da mail atmanin uygun olacagini dusundum, umarim rahatsiz etmiyorumdur.

3550'nin trunk ettigim portu:

!

interface GigabitEthernet0/12
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
!

2950'nin 3550'e bagli trun ettigim giga0/2 portu:

!

interface GigabitEthernet0/2
 switchport mode trunk
 logging event trunk-status
 storm-control broadcast level 70.00
 storm-control multicast level 70.00
!

3550 sh vtp status ciktisi:

backbone#show vtp status

VTP Version                     : 2
Configuration Revision          : 2
Maximum VLANs supported locally : 1005
Number of existing VLANs        : 20
VTP Operating Mode              : Server
VTP Domain Name                 : TEST_VTP
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
MD5 digest                      : 0xB1 0x6A 0xFC 0xD3 0x58 0xE7 0xE5 0xFD 
Configuration last modified by 10.10.10.1 at 3-1-93 00:19:25 Local updater ID is 10.10.10.1 on interface Vl1 (lowest numbered VLAN interface found) backbone#

2950 sh vtp status ciktisi:

edge# sh vtp status

VTP Version                     : 2
Configuration Revision          : 2
Maximum VLANs supported locally : 250
Number of existing VLANs        : 20
VTP Operating Mode              : Client
VTP Domain Name                 : TEST_VTP
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
MD5 digest                      : 0xB1 0x6A 0xFC 0xD3 0x58 0xE7 0xE5 0xFD 
Configuration last modified by 10.10.10.1 at 3-1-93 00:19:25 edge#

3550 uzerinde conf t dedikten sonra sirasi ile vtp domain TEST_VTP, vtp mode server, vtp password test diyoruz.

Ardindan 2950 uzerinde conf t ve sirasi ile vtp mode client, vtp domain TEST_VTP, vtp password test diyoruz.

Bu asamadan sonra 3550 uzerinde VLAN bilgilerini tasiyan TEST_VTP server'i, test sifresi ile aktif etmis oluyoruz. 2950 ise trunk ettigimiz porttan 3550 uzerinde TEST_VTP domainine test sifresi ile baglanip VLAN bilgilerini aliyor.

Ornek bir VLAN olusturup 3550 uzerinde test edebilirsiniz;

vlan database
vlan 2 name TEST_VLAN
exit

port trunk etmek icin;

3550 tarafinda:

conf t
interface giga0/12
switchport trunk encapsulation dot1q
switchport mode trunk

2950 tarafinda:

conf t
interface giga0/2
switchport mode trunk

komutlarini vermek yetiyor.

saygilarimla,
iyi calismalar.

--
Ozgur Karatas
--

       
---------------------------------
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.

[Non-text portions of this message have been removed]
Received on Thu Apr 12 2007 - 16:42:47 CEST

This archive was generated by hypermail 2.2.0 : Thu Apr 12 2007 - 16:42:48 CEST