[cisco-ttl] Re: Cisco 878 G.SHDSL

From: e_demirkan <evren.demirk4n_at_....>
Date: Tue, 10 Apr 2007 14:46:27 -0000


Selamlar,

Sorunsuz kullandigim bi konfig asagida
Bazi sayfalarin acilip bazilarinin acilmamasi mtu ayarlarindan kaynaklaniyor olabilir.

http://www.cisco.com/warp/public/794/router_mtu.html

controller DSL 0
 mode atm
 line-term cpe
 line-mode 2-wire line-zero
 dsl-mode shdsl symmetric annex A-B
 line-rate auto

!
!
!
!
!

interface BRI0
 no ip address
 encapsulation hdlc
 shutdown
!
interface ATM0
 no ip address
 atm vc-per-vp 64
 no atm ilmi-keepalive
 pvc 8/35
  pppoe-client dial-pool-number 1
 !
!
interface FastEthernet0
!
interface FastEthernet1
!
interface FastEthernet2
!
interface FastEthernet3
!
interface Vlan1
 description INSIDE
 ip address 10.0.0.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly
 ip tcp adjust-mss 1452
 hold-queue 100 out
!

saygilar,
Evren

Received on Tue Apr 10 2007 - 19:41:41 CEST

This archive was generated by hypermail 2.2.0 : Tue Apr 10 2007 - 19:41:41 CEST