Re: [cisco-ttl] PRI Kanalinda Belirli Timeslot'a Cagri Gondermek

From: Cumhur Kizilari <yahoo_at_....>
Date: Wed Feb 28 2007 - 21:20:03 CET


Selamlar Ilker,

http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d5cf7.html

<http://www.cisco.com/en/US/products/sw/iosswrel/ps5207/products_feature_guide09186a00802d5cf7.html> Bu dokumanda 12.3(11)T de o ozelligin basladigindan bahsediliyor sizinki T siz.

Bu IOS 'u temin edip dener misin ?

Ayrica
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122t/122t11/ftgwrepg.htm

Bu dokumana da goz atmani oneririm.

Kolay gelsin,
Cumhur

On 2/28/07, Ilker YILMAZ <ilker@ilkeryilmaz.net> wrote:
>
> Merhaba,
>
>
>
> Bir 5300 serisi GW ile local PBX PRI kanal ile konusmaktalar ve VoIP
> terminasyon yapilmakta. Burada herhangi bir sorun yok. Yapmak istedigim
> ise
> belirli b_channel'lara farkli dial-peer pots'lar uzerinden cagri
> gondermek.
>
>
>
> Biraz arastirma ile "Dial-Out DSO Level Trunk Group" anahtar kelimesi ile
> bazi yapilandirma ornekleri mevcut fakat bu ornekler T1 kanallarinda
> gecerli. Ornegin;
>
>
>
> ########
>
>
>
> Configure Multiple Dial-Out DS0 Level Trunk Groups on a PRI Trunk: Example
>
> The following example shows how to configure B channels from a PRI channel
> into a DS0 trunk group:
>
>
>
> controller T1 0
>
>
>
> pri-group timeslots 1-24
>
>
>
> trunk-group L1 timeslots 1-5 preference 10
>
>
>
> !
>
>
>
> The following example shows how to include all the B channels of the PRI
> channel into a trunk group:
>
>
>
> interface serial 0:23
>
>
>
> trunk-group L2 20
>
>
>
> ##########
>
>
>
> IOS'u 12.3(22) olan gatewayimizde ise controller altinda bu komutu
> goremiyoruz "trunk-group";
>
>
>
> 5300(config)#contr e1 1
>
> 5300(config-controller)#?
>
> Controller configuration commands:
>
> cablelength cable length for a DS1 link
>
> cas-custom cas group customization configuration
>
> channel-group Specify the timeslots to channel-group mapping for an
> interface
>
> clock Specify the clock source for a DS1 link
>
> default Set a command to its defaults
>
> description Controller specific description
>
> ds0 ds0 commands
>
> ds0-group Configure group of timeslots to a particular signaling
> type
>
> exit Exit from controller configuration mode
>
> extsig Configure an external signalling protocol - { mgcp }
>
> framing Specify the type of Framing on a E1 link
>
> guard-timer Guard timer (0-20) for xcsp calls - timer duration and
>
> accept/reject on expiry
>
> help Description of the interactive help system
>
> line-termination Specify the line termination for E1
>
> linecode Specify the line encoding method for a E1 link
>
> loopback Put the entire E1 line into loopback
>
> no Negate a command or set its defaults
>
> pri-group Configure the specified timeslots for PRI
>
> shutdown Shut down a E1 link (send Blue Alarm)
>
> voice-class specify a voice class
>
>
>
>
>
> Belirli b_channel'lara farkli pots dial-peer'lari uzerinden cagri gonderme
> konusunda fikri olan arkadaslarimiz var ise cok sevinirim.
>
>
> Tesekkurler
>
> Ilker
>
>
>
>

[Non-text portions of this message have been removed] Received on Wed Feb 28 23:51:33 2007

This archive was generated by hypermail 2.1.8 : Wed Feb 28 2007 - 23:51:33 CET