[cisco-ttl] qos bandwith sorunu

From: emre aksoy <enisaksoy2000_at_....>
Date: Wed Dec 27 2006 - 17:20:11 CET


  A&#351;ag&#305;da konfigurasyonlar&#305;n&#305; verdi&#287;im router da   map-class frame-relay VOIPovFR-256K

   frame-relay cir 256000
   frame-relay bc 2560
   frame-relay be 0
   frame-relay mincir 256000
   frame-relay fragment 320
   frame-relay ip rtp priority 16384 16383 120
   no service-policy output VOICE-POLICY-256K   service-policy output QoS-Policy-Trust

  qos de&#287;erlerini girdi&#287;imde a&#351;a&#287;&#305;daki hata ile kar&#351;&#305;la&#351;&#305;yorum.Gerekli ç&#305;kt&#305;lar a&#351;ag&#305;daki gibidir yard&#305;mc&#305; olabilirseniz sevinirim.   

I/f Serial1/5:2.1 DLCI 150 class QoS-VoIP-RTP-Trust requested bandwidth 70%, available only 53%                           

  SOURCE#show interfaces serial 1/5:2
Serial1/5:2 is up, line protocol is up
  Hardware is Multichannel E1
  MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,

     reliability 255/255, txload 1/255, rxload 1/255   Encapsulation FRAME-RELAY, crc 16, Data non-inverted   Keepalive set (10 sec)
  LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0   LMI enq recvd 782, LMI stat sent 782, LMI upd sent 0, DCE LMI up   LMI DLCI 0 LMI type is ANSI Annex D frame relay DCE   FR SVC disabled, LAPF state down
  Broadcast queue 0/64, broadcasts sent/dropped 2602/0, interface broadcasts 2471   Last input 00:00:01, output 00:00:01, output hang never   Last clearing of "show interface" counters 02:16:30   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0   Queueing strategy: dual fifo
  Output queue: high size/max/dropped 0/256/0   Output queue: 0/128 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec

     37831 packets input, 1364474 bytes, 0 no buffer
     Received 0 broadcasts, 9 runts, 0 giants, 0 throttles
     10 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort
     43451 packets output, 2393492 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions 

  no alarm present
  Timeslot(s) Used:27-30, subrate: 64Kb/s, transmit delay is 0 flags

  SOURCE#show interfaces serial 1/5:2.1
Serial1/5:2.1 is up, line protocol is up   Hardware is Multichannel E1
  Description: ISTOC 0106031561 LL 256
  Internet address is 10.255.0.49/30
  MTU 1500 bytes, BW 256 Kbit, DLY 20000 usec,

     reliability 255/255, txload 1/255, rxload 1/255   Encapsulation FRAME-RELAY
  Last clearing of "show interface" counters never


           

  Policy Map QoS-Policy-Trust

      Class QoS-VoIP-RTP-Trust
    ---------------------- Class Map match-any QoS-VoIP-RTP-Trust (id 11)
    ------------------------ Match ip  dscp ef (46)
        Strict Priority
        Bandwidth 70 (%)
      Class QoS-VoIP-Control-Trust
  -------------------------- Class Map match-any QoS-VoIP-Control-Trust (id 12)
  --------------------------- Class Map match-any QoS-VoIP-Control-Trust (id 12)
    -------------------------- Match ip  dscp cs3 (24)
     --------------------------Match ip  dscp af31 (26)
      Bandwidth 5 (%) Max Threshold 64 (packets)
      Class class-default
        Flow based Fair Queueing
        Bandwidth 0 (kbps) Max Threshold 64 (packets)
  Policy Map QoS-Policy-Trust
      Class QoS-VoIP-RTP-Trust
        Strict Priority
        Bandwidth 70 (%)
      Class QoS-VoIP-Control-Trust
        Bandwidth 5 (%) Max Threshold 64 (packets)
      Class class-default
        Flow based Fair Queueing
        Bandwidth 0 (kbps) Max Threshold 64 (packets)
  -----------------------------------------------------------------------


[Non-text portions of this message have been removed] Received on Thu Dec 28 17:31:21 2006

This archive was generated by hypermail 2.1.8 : Thu Dec 28 2006 - 17:31:21 CET