[cisco-ttl] cisco 1721 g.shdsl problemi

From: Mert Hakki Bingol <kurzon_at_....>
Date: Wed Jul 26 2006 - 09:20:29 EEST


merhaba,
cisco 1721'e shdsl modülü takarak iki lokasyonu point to point konu&#351;turmak istiyoruz.
dsl controller up, atm interface up ancak ne kendi atm interface'ime ne de kar&#351;&#305; interface'e ping atam&#305;yorum. yard&#305;mc&#305; olursan&#305;z çok sevinirim.

controller DSL 0
 mode atm
 line-term cpe
 line-mode auto
 dsl-mode shdsl symmetric annex B


interface ATM0
 no ip address
 no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
 ip address 192.168.1.1 255.255.255.0
 no snmp trap link-status
 pvc 0/35
  encapsulation aal5snap
 !

kar&#351;&#305; tarafta da tamamen ayn&#305; konfigürasyon. tek fark atm0.1'in ip'si 192.168.1.2


#ping 192.168.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds: .....
Success rate is 0 percent (0/5)

te&#351;ekkürler.

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links


<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/cisco-ttl/
<*> To unsubscribe from this group, send an email to:
cisco-ttl-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Thu Jul 27 13:01:15 2006

This archive was generated by hypermail 2.1.8 : Thu Jul 27 2006 - 13:01:16 EEST