[cisco-ttl] Re: IPSec ve VPN Client

From: serust <sustundag_at_....>
Date: Tue Apr 04 2006 - 17:48:29 EEST


Sancar merhaba sorunun cozulmesine sevindim. Bahsettigin sorun nat tamininda icerindeki network'un router'da yarattigin ip havuzuna gecisinde nat'a ugramasindan kaynaklaniyor. Cozumu cok basit.
Fardezeliki
ip local pool mypool 172.16.1.50 172.16.1.52 araligi icin bir havuz yarattin.

access-list 101 deny ip 192.168.1.0 (ic networkun) 0.0.0.255 host 172.16.1.50
access-list 101 deny ip 192.168.1.0 (ic networkun) 0.0.0.255 host 172.16.1.51
access-list 101 deny ip 192.168.1.0 (ic networkun) 0.0.0.255 host 172.16.1.52
access-list 101 permit ip 192.168.1.0 0.0.0.255 any

ip nat inside source route-map nonat interface dialer0 overload

route-map nonat permit 10
match ip address 101

Bu tip bir konfigurasyonla sorunu cozebilirsin. Takildigin bir sey olursa yaz yine yardimci olalim iyi calismalar dilerim

Serkan Ustundag

Secura Guvenlik Teknolojileri

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
Received on Tue Apr 4 18:00:08 2006

This archive was generated by hypermail 2.1.8 : Tue Apr 04 2006 - 18:00:10 EEST