RE: [cisco-ttl] 2 router serial interface'den baðlama

From: Hilmiye Balcik <balcikh_at_....>
Date: Thu Jun 16 2005 - 14:33:27 EEST


Evet, baglayabilirsiniz. Bunun için F/R switching yapmaniz gerekir. Ayrica DTE-DCE kablo kullanmaniz gerekecek. Bunun için, normal bir F/R konfig. yapin, sadece DCE kablonun bagli oldugu router uzerinde digerinden farkli birkac komut kullanmaniz gerekecek. İlgili konfigler ektedir.

Kolay Gelsin,
Hilmiye

-----Original Message-----
From: cisco-ttl@yahoogroups.com [mailto:cisco-ttl@yahoogroups.com] On Behalf Of Bilal Tas Sent: Thursday, June 16, 2005 2:12 PM
To: cisco-ttl@yahoogroups.com
Subject: [cisco-ttl] 2 router serial interface'den baðlama

Merhaba
2 adet router'ý lokalde serial interface'den modem olmadan baðlayýp çalýþtýrabilirmiyiz. Bununla ilgili örnek var mý elinizde.                 



Discover Yahoo!
 Have fun online with music videos, cool games, IM & more. Check it out!

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. Yahoo! Groups Links  


test1#sh run
Building configuration...

Current configuration:
!

version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!

hostname test1
!
!
!
!
!
!

ip subnet-zero
!

frame-relay switching
!
!

process-max-time 200
!

interface Ethernet0
 no ip address
 no ip directed-broadcast
 shutdown
!

interface Serial1
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay
 clockrate 128000
 cdp enable
 frame-relay lmi-type ansi
 frame-relay intf-type dce
!

interface Serial1.1 point-to-point
 ip address x.x.x.x
 no ip directed-broadcast
 frame-relay interface-dlci 16
!

ip classless
no ip http server
!
!

line con 0
 transport input none
line vty 0 4
 login
!

end

test1#sh int s0
Serial0 is up, line protocol is up
  Hardware is QUICC Serial
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,

     reliability 255/255, txload 1/255, rxload 1/255   Encapsulation FRAME-RELAY IETF, loopback not set   Keepalive set (10 sec)
  LMI enq sent 13, LMI stat recvd 0, LMI upd recvd 0   LMI enq recvd 55, LMI stat sent 55, LMI upd sent 0, DCE LMI up   LMI DLCI 0 LMI type is ANSI Annex D frame relay DCE   Broadcast queue 0/64, broadcasts sent/dropped 23/0, interface broadcasts 3   Last input 00:00:00, output 00:00:00, output hang never   Last clearing of "show interface" counters 00:14:06   Input queue: 0/75/0 (size/max/drops); Total output drops: 0   Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)

     Conversations  0/2/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec
     4470 packets input, 459397 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     4516 packets output, 461634 bytes, 0 underruns
     0 output errors, 0 collisions, 8 interface resets
     0 output buffer failures, 0 output buffers swapped out
     14 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

test1#sh frame pvc

PVC Statistics for interface Serial0 (Frame Relay DCE)

              Active     Inactive      Deleted       Static
  Local          1            0            0            0
  Switched       0            0            0            0
  Unused         0            0            0            0

DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.1

  input pkts 4415          output pkts 4463         in bytes 458627
  out bytes 462566         dropped pkts 0           in FECN pkts 0
  in BECN pkts 0           out FECN pkts 0          out BECN pkts 0
  in DE pkts 0             out DE pkts 0
  out bcast pkts 23         out bcast bytes 7424
  pvc create time 00:14:12, last time pvc status changed 00:09:06 test1#ping 192.168.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
!!!!!

Success rate is 100 percent (5/5), round-trip min/avg/max = 64/75/80 ms test1#


test2#sh int s0
Serial0 is up, line protocol is up
  Hardware is QUICC Serial
  MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, rely 255/255, load 1/255   Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec)   LMI enq sent 54, LMI stat recvd 32, LMI upd recvd 0, DTE LMI up   LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0   LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE   Broadcast queue 0/64, broadcasts sent/dropped 10/0, interface broadcasts 2   Last input 00:00:00, output 00:00:00, output hang never   Last clearing of "show interface" counters never   Queueing strategy: fifo
  Output queue 0/40, 0 drops; input queue 0/75, 0 drops   5 minute input rate 1000 bits/sec, 4 packets/sec   5 minute output rate 1000 bits/sec, 3 packets/sec

     4408 packets input, 454826 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     4417 packets output, 455369 bytes, 0 underruns
     0 output errors, 0 collisions, 10 interface resets
     0 output buffer failures, 0 output buffers swapped out
     21 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

test2# sh frame pvc

PVC Statistics for interface Serial0 (Frame Relay DTE)

DLCI = 100, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0.1

  input pkts 4398          output pkts 4383         in bytes 455326
  out bytes 456627         dropped pkts 0           in FECN pkts 0
  in BECN pkts 0           out FECN pkts 0          out BECN pkts 0
  in DE pkts 0             out DE pkts 0
  out bcast pkts 10         out bcast bytes 3488
  pvc create time 00:10:39, last time pvc status changed 00:05:17 test2#sh run
Building configuration...

Current configuration:
!

version 12.0
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!

hostname test2
!
!

ip subnet-zero
!
!
!

interface Ethernet0
 no ip address
 no ip directed-broadcast
 shutdown
!

interface Serial0
 no ip address
 no ip directed-broadcast
 encapsulation frame-relay IETF
 logging event subif-link-status
 logging event dlci-status-change
 no fair-queue
 frame-relay lmi-type ansi
!

interface Serial0.1 point-to-point
 ip address x.x.x.x
 no ip directed-broadcast
 frame-relay interface-dlci 16
!

ip classless
!
!

line con 0
 transport input none
line vty 0 4
 login
!

end

test2#

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
Received on Thu Jun 16 14:35:45 2005

This archive was generated by hypermail 2.1.8 : Thu Jun 16 2005 - 14:35:45 EEST