[cisco-ttl] Dialer interface nasıl down olur

From: Ilyas Celik <ilyas.celik_at_....>
Date: Mon May 02 2005 - 21:54:14 EEST


Merhaba ;

cisco 1721 serisi bir routerda primary hat adsl ve LL'ı backup olarak kullanmak istiyorum.Dialer interface ADSL hat down olsa bile down olmadıgı icin (spoofing modeda oldugu icin) floating-static route devreye girmiyor. ATM interface altında backup interface serial 0 yazsam bile route dialer 0 interface oldugu icin olmuyor. Default route'u atm interface'e versem ADSL hattan trafik gidip gelisi olmuyor.

interface ATM0.1 point-to-point
 pvc 8/35
  pppoe-client dial-pool-number 1
 !
!
interface FastEthernet0
 ip address 10.0.0.2 255.255.255.0
 ip nat inside
 ip tcp adjust-mss 1452
 speed auto
!
interface serial 0
 ip add a.b.c.d mak  

interface Dialer1
 ip address negotiated
 ip nat outside
 encapsulation ppp
 ip tcp adjust-mss 1452
 dialer pool 1
 no cdp enable
 ppp pap sent-username xxx password 0 xxx

ip route 0.0.0.0 0.0.0.0 dialer 0
ip route 0.0.0.0 0.0.0.0 serial 0 10

Bu durumda ne yapmam gerekir.Yardımcı olan arkadaslara simdiden tesekkürler.

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links


<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/cisco-ttl/
<*> To unsubscribe from this group, send an email to:
cisco-ttl-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Mon May 2 21:55:30 2005

This archive was generated by hypermail 2.1.8 : Mon May 02 2005 - 21:55:30 EEST