[cisco-ttl] Cisco1721+wic1adsl

From: ozcanilikhan (ozcanilikhan_at_yahoo.com)
Date: Sat Mar 05 2005 - 12:37:44 EET


Merhaba;
Cisco 1721 ve iki adet wic1-adsl kart ile bağlantı yapmaya
çalışıyorum. İki hattın içeriye dengeli bir biçimde
(load balancing)
dağıtılmasını istiyorum, tek hat üzerinden
bağlantıyı kurdum,
konfigürasyonu değiştirip çift hatta uyarlamaya
çalıştım, fakat bir
yerlerde hata yapmış olmalıyım ki bağlantı
gerçekleşmedi. Yardım
edebilirseniz memnun olurum.
--------------------------------
!
hostname Anka1_1721
!
enable password ********
!
ip subnet-zero
ip name-server 212.156.4.4
ip name-server 212.156.4.1
!
interface ATM0
no ip address
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
no fair-queue
!
interface ATM0.1 point-to-point
pvc 8/35
  pppoe-client dial-pool-number 1
!
!
interface ATM1
no ip address
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
no fair-queue
!
interface ATM0.1 point-to-point
pvc 8/35
  pppoe-client dial-pool-number 2
!
!
interface FastEthernet0
description +++ LAN +++
ip address 10.0.0.130 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
speed 100
hold-queue 100 out
half-duplex
!
!
interface Dialer0
description +++ TTNet ADSL +++
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username *****@ttnett password ******
!
!
interface Dialer1
description +++ TTNet ADSL +++
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 2
dialer-group 2
no cdp enable
ppp authentication pap callin
ppp pap sent-username ******@ttnet password ******
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 10.0.0.0 255.255.255.0 FastEthernet0
!
ip http server
no ip http secure-server
!
ip nat inside source list 101 interface Dialer0 overload
ip nat inside source list 101 interface Dialer1 overload
ip nat inside source static 10.0.0.100 10.0.1.100
!
access-list 1 permit 10.0.0.0 0.0.0.255
access-list 101 permit ip 10.0.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
!
!
----------------------------------
Bu tek hat için hazırladığım konfigürasyon, sorunsuz
çalışıyor.
!
hostname Anka1_1721
!
enable password *********
!
ip subnet-zero
ip name-server 212.156.4.4
ip name-server 212.156.4.1
!
interface ATM0
no ip address
no ip mroute-cache
no atm ilmi-keepalive
dsl operating-mode auto
no fair-queue
!
interface ATM0.1 point-to-point
pvc 8/35
  pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
description +++ LAN +++
ip address 10.0.0.130 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
speed 100
hold-queue 100 out
half-duplex
!
!
interface Dialer0
description +++ TTNet ADSL +++
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username ******@ttnet password ******
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 10.0.0.0 255.255.255.0 FastEthernet0
!
ip http server
no ip http secure-server
!
ip nat inside source list 101 interface Dialer0 overload
ip nat inside source static 10.0.0.100 10.0.1.100
!
access-list 1 permit 10.0.0.0 0.0.0.255
access-list 101 permit ip 10.0.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
!
!

--

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listede onerilen cozumlerin uygulanmasindaki tum sorumluluk kullaniciya aittir. Liste yoneticileri, liste uyeleri ya da bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar.

Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz. Yahoo! Groups Links

<*> To visit your group on the web, go to: http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to: cisco-ttl-unsubscribe_at_yahoogroups.com

<*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/



This archive was generated by hypermail 2.1.3 : Mon Mar 07 2005 - 20:07:20 EET