YNT: [cisco-ttl] E1 Firmware not running

From: Sinan Ilkiz (sinan.ilkiz_at_borusantelekom.com)
Date: Wed Feb 23 2005 - 21:25:56 EET


Merhaba Devrim,
 
Vermiş olduğun bilgiler için çok teşekkürler. Birkaç sorum daha olacak, sence sorun karttan değil de şaseden olabilir mi? Kart neredeyse 1 yıldır çalışan kart. Bir routerdan çıkartılıp sorun yaşamakta olduğumuz 3640'a takıldı. Aynı 3640 üzerinde diğer E1 kartlarda da aynı hata mesajı "zaman zaman" çıkıyor.
 
Ayrıca kartın (veya şasenin) bozuk olduğuna kesin olarak kanaat getirebilmek için izleyebileceğimiz bir yol var mı? Çünkü bu hata mesajını tekrar oluşturamıyoruz. Zaman zaman çıkıyor, zaman zaman çıkmıyor. İşin ilginç tarafı kartları ve router'ı işimizde kullanmaya başlamadan önce bir kaç gün başka bir router ile back-to-back bağlayıp üzerinden trafik geçiriyoruz. Testlerimizi yaparken bu hata mesajı çıkmıyor, götürüp yerine koyuyoruz çıkıyor. (IOS aynı)
 
Teşekkürler, iyi çalışmalar.

________________________________

Kimden: Devrim Yener KUCUK [mailto:dkucuk_at_cisco.com]
Gönderilmiş: Çar 23.02.2005 19:51
Kime: cisco-ttl_at_yahoogroups.com
Konu: Re: [cisco-ttl] E1 Firmware not running

Merhaba Sinan,

Bu E1 kartlarda cok fazla gordugumuz bir sorun.
Iki temel nedeni var:

1-IOS bug
2-Hardware

Burda hangisi olduguna bakalim:

1-
CSCdy01451
Externally found moderate defect: Resolved (R)
%CONTROLLER-2-FIRMWARE: Controller E1 firmware is not running
Integrated in: 012.003(009.008)

CSCed60365
Externally found moderate defect: Resolved (R)
CONTROLLER-2-FIRMWARE firmware is not running message for the NM-CE1
Integrated in: 012.003(011.007)

Kullanilan IOS 12.3.12, bu iki bugin fixini de iceriyor. O zaman sorun IOS
de degil.

2-
NM-2CE1B modulunu degistirmen gerekecek

Ayrica sorudan bagimsiz olarak ayrica Controller seviyesinde cok fazla
violation hatasi var.

> E1 2/1 is up.
....
> 765 Line Code Violations, 765 Path Code Violations
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a0080
0f99bb.shtml

Kolay gelsin

Devrim

----- Original Message -----
From: "Sinan Ilkiz" <sinan.ilkiz_at_borusantelekom.com>
To: <cisco-ttl_at_yahoogroups.com>
Sent: Wednesday, February 23, 2005 5:00 PM
Subject: [cisco-ttl] E1 Firmware not running

>
>
> Merhaba herkese,
>
> Kullanmakta oldu?umuz 3640'lardan bir tanesi ile bir sorun ya?amaktayyz.
A?a?yda yazdy?ym hata mesajyny daha önce gören biri var my acaba?
>
> 2w5d: %CONTROLLER-2-FIRMWARE: Controller E1 2/1, firmware is not running
>
> Bu hata mesajy gelmeye devam ederken E1 up durumda ve E1 üzerindeki
devreler "show ip interface brief" çyktysynda up up gözükmekte. Ayryca
trafik geçi?inde herhangi bir sorun ya?anmamakta. "Cisco Error Message
Decoder" bu hata mesajy için eskiden saty? sorumlunuzla görü?ün gibi bir?ey
diyordu :-) ?uan bakty?ymda "%CONTROLLER-2-FIRMWARE: Controller [chars],
[chars] A software or hardware error has occurred." demekte.
>
> Bu hata mesajyny daha önce gören arkada?lar var my acaba? Sorunu nasyl
çözülece?iyle ilgili fikre sahip olan arkada?lar yardymcy olabilirse çok
sevinirim.
>
> Te?ekkürler.
>
>
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-I-M), Version 12.3(12), RELEASE SOFTWARE
(fc3)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2004 by cisco Systems, Inc.
> Compiled Mon 29-Nov-04 18:13 by kellythw
> Image text-base: 0x60008B00, data-base: 0x60D22000
>
> ROM: System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
> ROM: 3600 Software (C3640-I-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
>
> Xxx uptime is 2 weeks, 5 days, 1 hour, 12 minutes
> System returned to ROM by power-on
> System restarted at 16:43:04 GMT+2 Fri Feb 4 2005
> System image file is "flash:c3640-i-mz.123-12.bin"
>
> cisco 3640 (R4700) processor (revision 0x00) with 112640K/18432K bytes of
memory.
> Processor board ID 13892709
> R4700 CPU at 100MHz, Implementation 33, Rev 1.0
> Channelized E1, Version 1.0.
> Bridging software.
> X.25 software, Version 3.0.0.
> Primary Rate ISDN software, Version 1.1.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 10 Serial network interface(s)
> 2 Serial(sync/async) network interface(s)
> 6 Channelized E1/PRI port(s)
> DRAM configuration is 64 bits wide with parity disabled.
> 125K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> --------
>
> E1 2/1 is up.
> Applique type is Channelized E1 - balanced
> Description: DXX TDM 3587
> No alarms detected.
> alarm-trigger is not set
> Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
> Data in current interval (620 seconds elapsed):
> 765 Line Code Violations, 765 Path Code Violations
> 0 Slip Secs, 3 Fr Loss Secs, 3 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 6 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 1:
> 765 Line Code Violations, 513 Path Code Violations
> 0 Slip Secs, 6 Fr Loss Secs, 3 Line Err Secs, 1 Degraded Mins
> 1 Errored Secs, 0 Bursty Err Secs, 8 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 2:
> 1530 Line Code Violations, 1032 Path Code Violations
> 0 Slip Secs, 10 Fr Loss Secs, 6 Line Err Secs, 2 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 3:
> 1530 Line Code Violations, 513 Path Code Violations
> 0 Slip Secs, 8 Fr Loss Secs, 6 Line Err Secs, 3 Degraded Mins
> 4 Errored Secs, 0 Bursty Err Secs, 10 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 4:
> 765 Line Code Violations, 510 Path Code Violations
> 0 Slip Secs, 2 Fr Loss Secs, 3 Line Err Secs, 1 Degraded Mins
> 1 Errored Secs, 0 Bursty Err Secs, 4 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 5:
> 2550 Line Code Violations, 1530 Path Code Violations
> 0 Slip Secs, 6 Fr Loss Secs, 10 Line Err Secs, 4 Degraded Mins
> 4 Errored Secs, 0 Bursty Err Secs, 12 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 6:
> 2295 Line Code Violations, 2043 Path Code Violations
> 0 Slip Secs, 8 Fr Loss Secs, 9 Line Err Secs, 2 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 16 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 7:
> 2805 Line Code Violations, 2049 Path Code Violations
> 0 Slip Secs, 6 Fr Loss Secs, 11 Line Err Secs, 2 Degraded Mins
> 3 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 8:
> 2550 Line Code Violations, 2046 Path Code Violations
> 0 Slip Secs, 7 Fr Loss Secs, 10 Line Err Secs, 2 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 15 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 9:
> 1530 Line Code Violations, 1533 Path Code Violations
> 0 Slip Secs, 8 Fr Loss Secs, 6 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 10:
> 2295 Line Code Violations, 1542 Path Code Violations
> 0 Slip Secs, 14 Fr Loss Secs, 8 Line Err Secs, 2 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 20 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 11:
> 1530 Line Code Violations, 768 Path Code Violations
> 0 Slip Secs, 14 Fr Loss Secs, 6 Line Err Secs, 4 Degraded Mins
> 3 Errored Secs, 0 Bursty Err Secs, 17 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 12:
> 3825 Line Code Violations, 3315 Path Code Violations
> 0 Slip Secs, 2 Fr Loss Secs, 15 Line Err Secs, 1 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 15 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 13:
> 2295 Line Code Violations, 1788 Path Code Violations
> 0 Slip Secs, 14 Fr Loss Secs, 9 Line Err Secs, 2 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 21 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 14:
> 2040 Line Code Violations, 1536 Path Code Violations
> 0 Slip Secs, 9 Fr Loss Secs, 7 Line Err Secs, 2 Degraded Mins
> 2 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 15:
> 0 Line Code Violations, 3 Path Code Violations
> 0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 5 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 16:
> 0 Line Code Violations, 3 Path Code Violations
> 0 Slip Secs, 8 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 8 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 17:
> 0 Line Code Violations, 10 Path Code Violations
> 0 Slip Secs, 12 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 12 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 18:
> 0 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 6 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
> 0 Errored Secs, 0 Bursty Err Secs, 6 Severely Err Secs, 0 Unavail
Secs
> Data in Interval 19:
> 18081 Line Code Violations, 0 Path Code Violations
> 0 Slip Secs, 14 Fr Loss Secs, 3 Line Err Secs, 1 Degraded Mins
> 1 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail
Secs
> Total Data (last 19 15 minute intervals):
> 46386 Line Code Violations, 20734 Path Code Violations,
> 0 Slip Secs, 159 Fr Loss Secs, 112 Line Err Secs, 29 Degraded Mins,
> 31 Errored Secs, 0 Bursty Err Secs, 239 Severely Err Secs, 0 Unavail
Secs
>
> --------------
>
> Slot 2:
> CE1 (Balanced) Port adapter, 2 ports
> Port adapter is analyzed
> Port adapter insertion time unknown
> EEPROM contents at hardware discovery:
> Hardware revision 1.1 Board revision D0
> Serial number 27371999 Part number 800-01235-04
> FRU Part Number: NM-2CE1B=
>
> Test history 0x0 RMA number 00-00-00
> EEPROM format version 1
> EEPROM contents (hex):
> 0x00: 01 2B 01 01 01 A1 A9 DF 50 04 D3 04 00 00 00 00
> 0x10: 68 00 00 00 01 12 20 00 FF FF FF FF FF FF FF FF
>
>
> UYARI/NOTIFICATION:
>
***************************************************************************
> Bu e-posta ve ekleri sadece gönderilen adres sahiplerine aittir. Bu
mesajyn yanly?lykla tarafynyza ula?my? olmasy halinde, lütfen göndericiye
derhal bilgi veriniz ve mesajy sisteminizden siliniz. BORUSAN TELEKOM bu
mesajyn içeri?i ve ekleri ile ilgili olarak hukuksal hiçbir sorumluluk kabul
etmez. Gönderen taraf hata veya unutmalardan sorumluluk kabul etmez.
>
> The information contained in this e-mail and any files transmitted with it
are intended solely for the use of the individual or entity to whom they are
addressed.If you received this message in error, please immediately notify
the sender and delete it from your system.BORUSAN TELEKOM doesn't accept any
legal responsibility for the contents and attachments of this message.The
sender does not accept liability for any errors or omissions.
>
>
***************************************************************************
>
>
> [Non-text portions of this message have been removed]
>
>
>
> Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.
>
> Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
e-posta gönderebilirsiniz.
> Yahoo! Groups Links
>
>
>
>
>

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.
Yahoo! Groups Links

UYARI/NOTIFICATION:
***************************************************************************
Bu e-posta ve ekleri sadece gönderilen adres sahiplerine aittir. Bu mesajın yanlışlıkla tarafınıza ulaşmış olması halinde, lütfen göndericiye derhal bilgi veriniz ve mesajı sisteminizden siliniz. BORUSAN TELEKOM bu mesajın içeriği ve ekleri ile ilgili olarak hukuksal hiçbir sorumluluk kabul etmez. Gönderen taraf hata veya unutmalardan sorumluluk kabul etmez.

The information contained in this e-mail and any files transmitted with it are intended solely for the use of the individual or entity to whom they are addressed.If you received this message in error, please immediately notify the sender and delete it from your system.BORUSAN TELEKOM doesn't accept any legal responsibility for the contents and attachments of this message.The sender does not accept liability for any errors or omissions.

***************************************************************************

[Non-text portions of this message have been removed]

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe_at_yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



This archive was generated by hypermail 2.1.3 : Wed Feb 23 2005 - 21:22:13 EET