RE: [cisco-ttl] E1 Firmware not running

From: Alper SELCUK (aselcuk_at_teknotel.net)
Date: Wed Feb 23 2005 - 19:39:18 EET


Merhaba,

Ayni sorunu daha once yasadik,
IOS tan kaynaklanan bir problem,
Kartta her hangi bir sorun yok,
Aslinda uzerindeki servis de normal calisiyor gibi gozukuyor ancak bazen
router kilitlenebiliyor.
12.2.16 versiyonunda bu hatayi vermiyor,
Sorunsuz calisan IOS dosyasi :
c3640-jk9s-mz.122-16.bin

Iyi calismalar,

Alper

-----Original Message-----
From: Sinan Ilkiz [mailto:sinan.ilkiz_at_borusantelekom.com]
Sent: Wednesday, February 23, 2005 6:00 PM
To: cisco-ttl_at_yahoogroups.com
Subject: [cisco-ttl] E1 Firmware not running

Merhaba herkese,

Kullanmakta olduğumuz 3640'lardan bir tanesi ile bir sorun yaşamaktayız.
Aşağıda yazdığım hata mesajını daha önce gören biri var mı acaba?

2w5d: %CONTROLLER-2-FIRMWARE: Controller E1 2/1, firmware is not running

Bu hata mesajı gelmeye devam ederken E1 up durumda ve E1 üzerindeki devreler
"show ip interface brief" çıktısında up up gözükmekte. Ayrıca trafik
geçişinde herhangi bir sorun yaşanmamakta. "Cisco Error Message Decoder" bu
hata mesajı için eskiden satış sorumlunuzla görüşün gibi birşey diyordu :-)
Şuan baktığımda "%CONTROLLER-2-FIRMWARE: Controller [chars], [chars] A
software or hardware error has occurred." demekte.

Bu hata mesajını daha önce gören arkadaşlar var mı acaba? Sorunu nasıl
çözüleceğiyle ilgili fikre sahip olan arkadaşlar yardımcı olabilirse çok
sevinirim.

Teşekkürler.

Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3640-I-M), Version 12.3(12), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Mon 29-Nov-04 18:13 by kellythw
Image text-base: 0x60008B00, data-base: 0x60D22000

ROM: System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
SOFTWARE (fc1)
ROM: 3600 Software (C3640-I-M), Version 12.3(12), RELEASE SOFTWARE (fc3)

Xxx uptime is 2 weeks, 5 days, 1 hour, 12 minutes
System returned to ROM by power-on
System restarted at 16:43:04 GMT+2 Fri Feb 4 2005
System image file is "flash:c3640-i-mz.123-12.bin"

cisco 3640 (R4700) processor (revision 0x00) with 112640K/18432K bytes of
memory.
Processor board ID 13892709
R4700 CPU at 100MHz, Implementation 33, Rev 1.0
Channelized E1, Version 1.0.
Bridging software.
X.25 software, Version 3.0.0.
Primary Rate ISDN software, Version 1.1.
2 FastEthernet/IEEE 802.3 interface(s)
10 Serial network interface(s)
2 Serial(sync/async) network interface(s)
6 Channelized E1/PRI port(s)
DRAM configuration is 64 bits wide with parity disabled.
125K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

--------

E1 2/1 is up.
  Applique type is Channelized E1 - balanced
  Description: DXX TDM 3587
  No alarms detected.
  alarm-trigger is not set
  Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
  Data in current interval (620 seconds elapsed):
     765 Line Code Violations, 765 Path Code Violations
     0 Slip Secs, 3 Fr Loss Secs, 3 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 6 Severely Err Secs, 0 Unavail Secs
  Data in Interval 1:
     765 Line Code Violations, 513 Path Code Violations
     0 Slip Secs, 6 Fr Loss Secs, 3 Line Err Secs, 1 Degraded Mins
     1 Errored Secs, 0 Bursty Err Secs, 8 Severely Err Secs, 0 Unavail Secs
  Data in Interval 2:
     1530 Line Code Violations, 1032 Path Code Violations
     0 Slip Secs, 10 Fr Loss Secs, 6 Line Err Secs, 2 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail Secs
  Data in Interval 3:
     1530 Line Code Violations, 513 Path Code Violations
     0 Slip Secs, 8 Fr Loss Secs, 6 Line Err Secs, 3 Degraded Mins
     4 Errored Secs, 0 Bursty Err Secs, 10 Severely Err Secs, 0 Unavail Secs
  Data in Interval 4:
     765 Line Code Violations, 510 Path Code Violations
     0 Slip Secs, 2 Fr Loss Secs, 3 Line Err Secs, 1 Degraded Mins
     1 Errored Secs, 0 Bursty Err Secs, 4 Severely Err Secs, 0 Unavail Secs
  Data in Interval 5:
     2550 Line Code Violations, 1530 Path Code Violations
     0 Slip Secs, 6 Fr Loss Secs, 10 Line Err Secs, 4 Degraded Mins
     4 Errored Secs, 0 Bursty Err Secs, 12 Severely Err Secs, 0 Unavail Secs
  Data in Interval 6:
     2295 Line Code Violations, 2043 Path Code Violations
     0 Slip Secs, 8 Fr Loss Secs, 9 Line Err Secs, 2 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 16 Severely Err Secs, 0 Unavail Secs
  Data in Interval 7:
     2805 Line Code Violations, 2049 Path Code Violations
     0 Slip Secs, 6 Fr Loss Secs, 11 Line Err Secs, 2 Degraded Mins
     3 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail Secs
  Data in Interval 8:
     2550 Line Code Violations, 2046 Path Code Violations
     0 Slip Secs, 7 Fr Loss Secs, 10 Line Err Secs, 2 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 15 Severely Err Secs, 0 Unavail Secs
  Data in Interval 9:
     1530 Line Code Violations, 1533 Path Code Violations
     0 Slip Secs, 8 Fr Loss Secs, 6 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail Secs
  Data in Interval 10:
     2295 Line Code Violations, 1542 Path Code Violations
     0 Slip Secs, 14 Fr Loss Secs, 8 Line Err Secs, 2 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 20 Severely Err Secs, 0 Unavail Secs
  Data in Interval 11:
     1530 Line Code Violations, 768 Path Code Violations
     0 Slip Secs, 14 Fr Loss Secs, 6 Line Err Secs, 4 Degraded Mins
     3 Errored Secs, 0 Bursty Err Secs, 17 Severely Err Secs, 0 Unavail Secs
  Data in Interval 12:
     3825 Line Code Violations, 3315 Path Code Violations
     0 Slip Secs, 2 Fr Loss Secs, 15 Line Err Secs, 1 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 15 Severely Err Secs, 0 Unavail Secs
  Data in Interval 13:
     2295 Line Code Violations, 1788 Path Code Violations
     0 Slip Secs, 14 Fr Loss Secs, 9 Line Err Secs, 2 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 21 Severely Err Secs, 0 Unavail Secs
  Data in Interval 14:
     2040 Line Code Violations, 1536 Path Code Violations
     0 Slip Secs, 9 Fr Loss Secs, 7 Line Err Secs, 2 Degraded Mins
     2 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail Secs
  Data in Interval 15:
     0 Line Code Violations, 3 Path Code Violations
     0 Slip Secs, 5 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 5 Severely Err Secs, 0 Unavail Secs
  Data in Interval 16:
     0 Line Code Violations, 3 Path Code Violations
     0 Slip Secs, 8 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 8 Severely Err Secs, 0 Unavail Secs
  Data in Interval 17:
     0 Line Code Violations, 10 Path Code Violations
     0 Slip Secs, 12 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 12 Severely Err Secs, 0 Unavail Secs
  Data in Interval 18:
     0 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 6 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     0 Errored Secs, 0 Bursty Err Secs, 6 Severely Err Secs, 0 Unavail Secs
  Data in Interval 19:
     18081 Line Code Violations, 0 Path Code Violations
     0 Slip Secs, 14 Fr Loss Secs, 3 Line Err Secs, 1 Degraded Mins
     1 Errored Secs, 0 Bursty Err Secs, 14 Severely Err Secs, 0 Unavail Secs
  Total Data (last 19 15 minute intervals):
     46386 Line Code Violations, 20734 Path Code Violations,
     0 Slip Secs, 159 Fr Loss Secs, 112 Line Err Secs, 29 Degraded Mins,
     31 Errored Secs, 0 Bursty Err Secs, 239 Severely Err Secs, 0 Unavail
Secs

--------------

Slot 2:
        CE1 (Balanced) Port adapter, 2 ports
        Port adapter is analyzed
        Port adapter insertion time unknown
        EEPROM contents at hardware discovery:
        Hardware revision 1.1 Board revision D0
        Serial number 27371999 Part number 800-01235-04
        FRU Part Number: NM-2CE1B=

        Test history 0x0 RMA number 00-00-00
        EEPROM format version 1
        EEPROM contents (hex):
          0x00: 01 2B 01 01 01 A1 A9 DF 50 04 D3 04 00 00 00 00
          0x10: 68 00 00 00 01 12 20 00 FF FF FF FF FF FF FF FF

UYARI/NOTIFICATION:
***************************************************************************
Bu e-posta ve ekleri sadece gönderilen adres sahiplerine aittir. Bu mesajın
yanlışlıkla tarafınıza ulaşmış olması halinde, lütfen göndericiye derhal
bilgi veriniz ve mesajı sisteminizden siliniz. BORUSAN TELEKOM bu mesajın
içeriği ve ekleri ile ilgili olarak hukuksal hiçbir sorumluluk kabul etmez.
Gönderen taraf hata veya unutmalardan sorumluluk kabul etmez.

The information contained in this e-mail and any files transmitted with it
are intended solely for the use of the individual or entity to whom they are
addressed.If you received this message in error, please immediately notify
the sender and delete it from your system.BORUSAN TELEKOM doesn't accept any
legal responsibility for the contents and attachments of this message.The
sender does not accept liability for any errors or omissions.

***************************************************************************

[Non-text portions of this message have been removed]

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
e-posta gönderebilirsiniz.
Yahoo! Groups Links

 

Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe_at_yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



This archive was generated by hypermail 2.1.3 : Wed Feb 23 2005 - 21:10:33 EET