RE: [cisco-ttl] cisco 1310g password'ü recovery etmenin yöntemini bilen varsa acil mail atabilirmi??????

From: Ali KAPTAN (ali.kaptan_at_alikaptan.name.tr)
Date: Mon Dec 20 2004 - 06:56:03 GMT

  • Next message: Onur Karaagaoglu: "Re: [cisco-ttl] Catalyst 2900XL problemi"

    Corrupt IOS Configuration or Lost Password Procedure
    This section describes the procedure for resetting the access point/bridge
    to its default settings in the unlikely event that the operating system is
    corrupt or if you have misplaced the configuration login and password.
    Because the access point/bridge does not have a mode switch, you must use
    the console port to perform this operation. Follow these steps to reset the
    unit to its default settings:

    ----------------------------------------------------------------------------

    ----
    Step 1 Open the CLI using a Telnet session or a connection to the access
    point/bridge's console port. 
    Step 2 Reboot the access point/bridge by removing power and reapplying
    power. 
    Step 3 Let the access point/bridge boot until the command prompt appears and
    the access point/bridge begins to inflate the image. When you see these
    lines on the CLI, press Esc: 
    ----------------------------------------------------------------------------
    ----
    Note Depending on the terminal emulation software you are using, you may
    have to press Esc twice to access the boot loader. 
    ----------------------------------------------------------------------------
    ----
    Loading
    "flash:/c1310-k9kw-7mx.v122_15_ja.200040314-k9w7-mx.v122_15_ja.20040314"
    ...#########################################################################
    ####
    ############################################################################
    #######
    ############################################################################
    ########
    Messages similar to those below appear: 
    Error loading
    "flash:/c1310-k9kw-7mx.v122_15_ja.200040314-k9w7-mx.v122_15_ja.20040314"
    Interrupt within 5 seconds to abort boot process.
    Boot process terminated.
    The system is unable to boot automatically. The BOOT environment variable
    needs to be set 
    to a bootable image.
    C1310 Boot Loader (C1310-BOOT-M), Version 12.2
    [BLD-v122_15-ja_throttle.20040314 100]
    bridge:
    Step 4 At the prompt, enter the following command to show a directory of the
    flash file system similar to the directory shown below: 
    bridge: dir flash:
    Directory of flash:/
    2	-rwx		0		<date>			env_vars
    5	drwx		384		<date>
    C1310-k9w7-mx.v133_15_JA.20040314
    3	-rwx		1128		<date>			config.txt
    4	-rwx		5		<date>
    private-config
    3693568 bytes available (4047872 bytes used)
    bridge:
    Step 5 Delete or rename the files config.txt and env_vars and reboot the
    bridge. Don't forget the / character before the filenames: 
    bridge: delete flash:config.txt
    Are you sure you want to delete flash:/config.txt (y/n)?y
    File "flash:/config.txt" deleted
    bridge: delete flash:/env_vars
    Are you sure you want to delete "flash:/env_vars" (y/n)?y
    File "flash:/env_vars" deleted
    bridge: boot
    ----------------------------------------------------------------------------
    ----
    Note The access point/bridge is configured with factory default values,
    including the IP address (set to receive an IP address using DHCP) and the
    default case-sensitive user name and password (Cisco). 
    ----------------------------------------------------------------------------
    ----
    Step 6 When IOS software is loaded and you chose to rename the env_vars and
    config.txt files, you can use the del privileged EXEC command to delete them
    from Flash. 
    bridge# del flash:env_varsold
    Delete filename [env_varsold]
    Delete flash:env_varsold [confirm]
    br#
    bridge# del flash:config.old
    Delete filename [config.old]
    Delete flash:config.old [confirm]
    bridge#
    -----Original Message-----
    From: YAVUZ TEMIZKAN [mailto:ytemizkan_at_inteltek.com.tr] 
    Sent: Tuesday, December 14, 2004 4:08 PM
    To: cisco-ttl_at_yahoogroups.com
    Subject: RE: [cisco-ttl] cisco 1310g password'ü recovery etmenin yöntemini
    bilen varsa acil mail atabilirmi??????
    1410 olmasın?
    1310g diye bir model duymadım.
     
    http://www.cisco.com/en/US/products/hw/wireless/ps430/products_password_reco
    very09186a00800949d0.shtml#ca_1410_ser
     
    	-----Original Message-----
    	From: Ali KAPTAN [mailto:ali.kaptan_at_alikaptan.name.tr] 
    	Sent: 14 Aralık 2004 Salı 15:56
    	To: cisco-ttl_at_yahoogroups.com
    	Subject: [cisco-ttl] cisco 1310g password'ü recovery etmenin
    yöntemini bilen varsa acil mail atabilirmi??????
    	
    	
    	
    	
    	
    	
    	[Non-text portions of this message have been removed]
    	
    	
    	
    	Bu listenin Cisco Systems ile herhangi bir baglantisi
    bulunmamaktadir. 
    	
    	Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine
    bir e-posta gönderebilirsiniz. 
    	
    	
    	
    Yahoo! Groups Sponsor	
    ADVERTISEMENT
    click here
    <http://us.ard.yahoo.com/SIG=129uvesgf/M=295196.4901138.6071305.3001176/D=gr
    oups/S=1705004726:HM/EXP=1103118973/A=2128215/R=0/SIG=10se96mf6/*http://comp
    anion.yahoo.com> 	
     
    <http://us.adserver.yahoo.com/l?M=295196.4901138.6071305.3001176/D=groups/S=
    :HM/A=2128215/rand=943883524> 	
    	
    ________________________________
    	Yahoo! Groups Links
    	
    	*	To visit your group on the web, go to:
    		http://groups.yahoo.com/group/cisco-ttl/
    		  
    	*	To unsubscribe from this group, send an email to:
    		cisco-ttl-unsubscribe_at_yahoogroups.com
    <mailto:cisco-ttl-unsubscribe_at_yahoogroups.com?subject=Unsubscribe> 
    		  
    	*	Your use of Yahoo! Groups is subject to the Yahoo! Terms of
    Service <http://docs.yahoo.com/info/terms/> . 
    [Non-text portions of this message have been removed]
    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir. 
    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
    e-posta gönderebilirsiniz. 
    Yahoo! Groups Links
     
    ------------------------ Yahoo! Groups Sponsor --------------------~--> 
    $4.98 domain names from Yahoo!. Register anything.
    http://us.click.yahoo.com/Q7_YsB/neXJAA/yQLSAA/26EolB/TM
    --------------------------------------------------------------------~-> 
    Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir. 
    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz. 
    Yahoo! Groups Links
    <*> To visit your group on the web, go to:
        http://groups.yahoo.com/group/cisco-ttl/
    <*> To unsubscribe from this group, send an email to:
        cisco-ttl-unsubscribe_at_yahoogroups.com
    <*> Your use of Yahoo! Groups is subject to:
        http://docs.yahoo.com/info/terms/
     
    


    This archive was generated by hypermail 2.1.5 : Mon Dec 20 2004 - 10:57:41 GMT