Re: [cisco-ttl] aux

From: Devrim Yener KUCUK (dkucuk_at_cisco.com)
Date: Wed Sep 01 2004 - 12:17:11 GMT

  • Next message: Beytullah ÖZKAN: "Re: [cisco-ttl] ürün hakkinda bilgi"

    Merhaba

    Sorun burada,
    00:17:33: CHAT5: Sending string: at&fs0=1&c1&d3&h1&r2&b1&m4&k1&w

    00:17:33: CHAT5: Expecting string: OK.

    ....

    00:17:38: CHAT5: Timeout expecting: OK

    00:17:38: CHAT5: Chat script test finished, status = Connection timed out; remote host not responding

    Goruldugu 5 saniye bekliyor , timeout oluyor

    External modem " Expect and Send Pairs " mantigi ile calisir.

    Yani her gonderilen string icin modemden cevap bekler router.

    www.cisco.com da "modem script execution" diye arama yapilirsa daha detayli bilgi bulunabilir

    Iki sey tavsiye ediyorum

    1- Modeme reverse telnet yapin, ve AT komutunu deneyin, modem "OK" ile cevap veriyor mu?

    Vermiyorsa modemin settinglerinden modemin AT ye OK ile cevap vermesini saglayin

    2- Kullanilan modemin chat scripti dogru olmali, dogru degilse, modem seviyesinden sonra PPP de corrupted paketlerle karsilasilmasi ve TIMEOUT alinmasi olasi.

    Yine calismazsa, en son sh ver/sh run ve debuglari gonderin bakalim

    Not: subject kismina kullandiginiz platform ve IOSu de yazarsaniz daha cabuk bakabiliriz.

    Kolay gelsin.

    Devrim

      ----- Original Message -----
      From: huseyin
      To: cisco-ttl_at_yahoogroups.com
      Sent: Wednesday, September 01, 2004 9:20 AM
      Subject: [cisco-ttl] aux

      Arkadaşlar gönderdiğiniz configurasyonları denedim ama hiçbir şekilde modem aramayı yapmıyor debuglarına baktığım zaman chat script ler aktif hale geçiyor ama en sonunda connecting timeout ohatası veriyor

      00:17:33: As5 DDR: No holdq created - not configured

      00:17:33: As5 DDR: Attempting to dial test

      00:17:33: CHAT5: Attempting async line dialer script

      00:17:33: CHAT5: Dialing using Modem script: test & System script: none

      00:17:33: As5 DDR: Increment call, 0

      00:17:33: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, encapsulation failed

      00:17:33: CHAT5: process started

      00:17:33: CHAT5: Asserting DTR

      00:17:33: TTY5: Set DTR to 1

      00:17:33: CHAT5: Chat script test started

      00:17:33: CHAT5: Sending string: at&fs0=1&c1&d3&h1&r2&b1&m4&k1&w

      00:17:33: CHAT5: Expecting string: OK.

      00:17:35: crm_send_periodic_update

      00:17:35: Serial0: attempting to restart

      00:17:35: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, sending

      00:17:35: As5 DDR: ip (s=10.1.1.1, d=195.155.3.3), 100 bytes, outgoing interesting (ip PERMIT)

      00:17:35: DDR: 45000064 00600000 FF01E998 0A010101 C39B0303 08004EEA

      00:17:35: DDR: 00801278 00000000 00101C58 ABCDABCD ABCDABCD ABCDABCD

      00:17:35: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, encapsulation failed.

      00:17:37: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, sending

      00:17:37: As5 DDR: ip (s=10.1.1.1, d=195.155.3.3), 100 bytes, outgoing interesting (ip PERMIT)

      00:17:37: DDR: 45000064 00610000 FF01E997 0A010101 C39B0303 08004719

      00:17:37: DDR: 00811278 00000000 00102428 ABCDABCD ABCDABCD ABCDABCD

      00:17:37: IP: s=10.1.1.1 (local), d=195.155.3.3 (Async5), len 100, encapsulation failed

      00:17:38: is_up: 0 state: 0 sub state: 1 line: 0 has_route: False.

      00:17:38: CHAT5: Timeout expecting: OK

      00:17:38: CHAT5: Chat script test finished, status = Connection timed out; remote host not responding

      00:17:38: AAA/ID(00000000): Could not set Disconnect Cause: Abort = 38, Terminate = 9

      00:17:38: TTY5: Line reset by "Async dialer"

      00:17:38: Async5: Async Interface dial-out failure

      00:17:38: As5 DDR: disconnecting call

      00:17:38: As5 DDR: Decrement call, 1

      00:17:38: TTY5: Modem: (unknown)->HANGUP

      00:17:38: TTY5: no timer type 0 to destroy

      00:17:38: TTY5: no timer type 1 to destroy

      00:17:38: TTY5: no timer type 3 to destroy

      00:17:38: TTY5: no timer type 4 to destroy

      00:17:38: TTY5: no timer type 2 to destroy

      00:17:39: AAA/ID(00000000): Could not set Disconnect Cause: Abort = 7, Terminate = 2

      00:17:39: TTY5: dropping DTR, hanging up

      00:17:39: TTY5: Set DTR to 0

      00:17:39: tty5: Modem: HANGUP->IDLE

      00:17:39: IP: s=10.1.1.1 (local), d=195.155.3.3, len 100, unroutable.

      00:17:41: IP: s=10.1.1.1 (local), d=195.155.3.3, len 100, unroutablePQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      00:17:41: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier. Transceiver problem?.

      Success rate is 0 percent (0/5)

      Router#

      00:17:44: TTY5: restoring DTR

      00:17:44: TTY5: Set DTR to 1

      00:17:48: As5 DDR: re-enable timeout

      00:17:48: As5 DDR: dialer cannot dialPQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      00:17:51: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier. Transceiver problem?PQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      00:18:01: %PQUICC_FE-5-LOSTCARR: PQUICC/FE(0/0), Lost carrier. Transceiver problem?

      00:18:05: crm_send_periodic_update

      00:18:05: Serial0: attempting to restart

      00:18:06: IP-Static: 0.0.0.0 0.0.0.0 Async5 Path = 1, route table no change, recursive flag clear

      00:18:06: IP-Static: 0.0.0.0 0.0.0.0 Serial0 Path =

      00:18:06: IP-ST: if_list try 2

      00:18:06: IP-ST: gw_list total 0, try 0, completed list TRUE

      00:18:06: IP-Static: all_list, time elapsed 0 ms

      00:18:08: is_up: 0 state: 0 sub state: 1 line: 0 has_route: False

      00:18:09: DHCPD: checking for expired leases.nod PQUICC_FEC(0/0): PHY 0 Read reg = 0 val = 1000

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      PQUICC_FEC(0/0): PHY 0 Read reg = 11 val = 100

      Bu listenin Cisco Systems ile herhangi bir baglantisi bulunmamaktadir.

      Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.

            Yahoo! Groups Sponsor
                  ADVERTISEMENT
                 
           
           

    ------------------------------------------------------------------------------
      Yahoo! Groups Links

        a.. To visit your group on the web, go to:
        http://groups.yahoo.com/group/cisco-ttl/
          
        b.. To unsubscribe from this group, send an email to:
        cisco-ttl-unsubscribe_at_yahoogroups.com
          
        c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



    This archive was generated by hypermail 2.1.5 : Wed Sep 01 2004 - 16:17:45 GMT