Re: [cisco-ttl] PRI problem

From: Devrim Yener KUCUK (dkucuk_at_cisco.com)
Date: Tue Aug 03 2004 - 11:22:07 GMT

  • Next message: İsmail: "Re: [cisco-ttl] PRI problem"

    Merhaba,

    Bu bilinen bi hata mesaji:

    "**ERROR**: isdn_cdapi_callback_from_rm: RM returned Reject, call_type 1 resource type 0"

    Once

    sh ver,
    sh run,
    sh isdn stat,

    alalim

    Devrim

      ----- Original Message -----
      From: İsmail CAN
      To: cisco-ttl_at_yahoogroups.com
      Sent: Tuesday, August 03, 2004 3:17 PM
      Subject: [cisco-ttl] PRI problem

      Merhabalar,

      Bir adet PRI baglantim var ve origination scenaryousnu deniyorum. Termination denemesi basarili ama originde asagidaki hata var. yorumu olan arkadaslar varsa cok sevinirim. Tesekkurler

      debug q931 ve 921
      as5350#
      Jan 1 05:22:42.242: ISDN Se3/2:15 Q921: User TX -> RRp sapi=0 tei=0 nr=93
      Jan 1 05:22:42.250: ISDN Se3/2:15 Q921: User RX <- RRf sapi=0 tei=0 nr=116
      Jan 1 05:22:43.154: ISDN Se3/2:15 Q921: User RX <- INFO sapi=0 tei=0, ns=93 nr=116
      Jan 1 05:22:43.154: ISDN Se3/2:15 Q931: SETUP pd = 8 callref = 0x1140
              Bearer Capability i = 0x8090A3
                      Standard = CCITT
                      Transer Capability = Speech
                      Transfer Mode = Circuit
                      Transfer Rate = 64 kbit/s
              Channel ID i = 0xA98387
                      Exclusive, Channel 7
              Progress Ind i = 0x8283 - Origination address is non-ISDN
              Calling Party Number i = 0x0183, '03122310354'
                      Plan:ISDN, Type:Unknown
              Called Party Number i = 0xC1, '2943050'
                      Plan:ISDN, Type:Subscriber(local)
              Sending Complete
      Jan 1 05:22:43.154: ISDN Se3/2:15 Q921: User TX -> RR sapi=0 tei=0 nr=94
      Jan 1 05:22:43.154: ISDN Se3/2:15 EVENT: process_rxstate: ces/callid 1/0x2D calltype 2 CALL_INCOMING
      Jan 1 05:22:43.158: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=116 nr=94
      Jan 1 05:22:43.158: ISDN Se3/2:15 Q931: CALL_PROC pd = 8 callref = 0x9140
              Channel ID i = 0xA18387
                      Preferred, Channel 7
      Jan 1 05:22:43.158: ISDN Se3/2:15 **ERROR**: isdn_cdapi_callback_from_rm: RM returned Reject, call_type 1 resource type 0
      Jan 1 05:22:43.162: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=117 nr=94
      Jan 1 05:22:43.162: ISDN Se3/2:15 Q931: DISCONNECT pd = 8 callref = 0x9140
              Cause i = 0x80AC - Requested circuit/channel not available
      Jan 1 05:22:43.170: ISDN Se3/2:15 Q921: User RX <- RR sapi=0 tei=0 nr=117
      Jan 1 05:22:43.174: ISDN Se3/2:15 Q921: User RX <- RR sapi=0 tei=0 nr=118
      Jan 1 05:22:43.298: ISDN Se3/2:15 Q921: User RX <- INFO sapi=0 tei=0, ns=94 nr=118
      Jan 1 05:22:43.298: ISDN Se3/2:15 Q931: RELEASE pd = 8 callref = 0x1140
      Jan 1 05:22:43.298: ISDN Se3/2:15 Q921: User TX -> RR sapi=0 tei=0 nr=95
      Jan 1 05:22:43.302: ISDN Se3/2:15 EVENT: process_rxstate: ces/callid 1/0x2D calltype 2 CALL_CLEARED
      Jan 1 05:22:43.302: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=118 nr=95
      Jan 1 05:22:43.302: ISDN Se3/2:15 Q931: RELEASE_COMP pd = 8 callref = 0x9140
      Jan 1 05:22:43.310: ISDN Se3/2:15 Q921: User RX <- RR sapi=0 tei=0 nr=119
      Jan 1 05:22:43.654: ISDN Se3/2:15 Q921: User RX <- INFO sapi=0 tei=0, ns=95 nr=119
      Jan 1 05:22:43.654: ISDN Se3/2:15 Q931: SETUP pd = 8 callref = 0x0503
              Bearer Capability i = 0x8090A3
                      Standard = CCITT
                      Transer Capability = Speech
                      Transfer Mode = Circuit
                      Transfer Rate = 64 kbit/s
              Channel ID i = 0xA98388
                      Exclusive, Channel 8
              Progress Ind i = 0x8283 - Origination address is non-ISDN
              Calling Party Number i = 0x0183, '03122456789'
                      Plan:ISDN, Type:Unknown
              Called Party Number i = 0xC1, '3256780'
                      Plan:ISDN, Type:Subscriber(local)
              Sending Complete
      Jan 1 05:22:43.654: ISDN Se3/2:15 Q921: User TX -> RR sapi=0 tei=0 nr=96
      Jan 1 05:22:43.654: ISDN Se3/2:15 EVENT: process_rxstate: ces/callid 1/0x2E calltype 2 CALL_INCOMING
      Jan 1 05:22:43.658: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=119 nr=96
      Jan 1 05:22:43.658: ISDN Se3/2:15 Q931: CALL_PROC pd = 8 callref = 0x8503
              Channel ID i = 0xA18388
                      Preferred, Channel 8
      Jan 1 05:22:43.658: ISDN Se3/2:15 **ERROR**: isdn_cdapi_callback_from_rm: RM returned Reject, call_type 1 resource type 0
      Jan 1 05:22:43.658: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=120 nr=96
      Jan 1 05:22:43.658: ISDN Se3/2:15 Q931: DISCONNECT pd = 8 callref = 0x8503
              Cause i = 0x80AC - Requested circuit/channel not available
      Jan 1 05:22:43.666: ISDN Se3/2:15 Q921: User RX <- RR sapi=0 tei=0 nr=120
      Jan 1 05:22:43.670: ISDN Se3/2:15 Q921: User RX <- RR sapi=0 tei=0 nr=121
      Jan 1 05:22:43.750: ISDN Se3/2:15 Q921: User RX <- INFO sapi=0 tei=0, ns=96 nr=121
      Jan 1 05:22:43.750: ISDN Se3/2:15 Q931: RELEASE pd = 8 callref = 0x0503
      Jan 1 05:22:43.750: ISDN Se3/2:15 Q921: User TX -> RR sapi=0 tei=0 nr=97
      Jan 1 05:22:43.750: ISDN Se3/2:15 EVENT: process_rxstate: ces/callid 1/0x2E calltype 2 CALL_CLEARED
      Jan 1 05:22:43.750: ISDN Se3/2:15 Q921: User TX -> INFO sapi=0 tei=0, ns=121 nr=97
      Jan 1 05:22:43.750: ISDN Se3/2:15 Q931: RELEASE_COMP pd = 8 callref = 0x8503
      Jan 1 05:22:43.758: ISDN Se3/2:15 Q921: User RX <- RR sapi=0 tei=0 nr=122
      Jan 1 05:22:53.758: ISDN Se3/2:15 Q921: User TX -> RRp sapi=0 tei=0 nr=97
      Jan 1 05:22:53.766: ISDN Se3/2:15 Q921: User RX <- RRf sapi=0 tei=0 nr=122
      Jan 1 05:23:03.766: ISDN Se3/2:15 Q921: User TX -> RRp sapi=0 tei=0 nr=97
      Jan 1 05:23:03.774: ISDN Se3/2:15 Q921: User RX <- RRf sapi=0 tei=0 nr=122
      Jan 1 05:23:04.114: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on FastEthernet0/0 (not half duplex), with SEP000B465DAE28 Port 1 (half duplex).



    This archive was generated by hypermail 2.1.5 : Tue Aug 03 2004 - 15:22:38 GMT