RE: [cisco-ttl] 2950 switch

From: Tayfun Tuna (t.tuna_at_auckland.ac.nz)
Date: Tue Mar 02 2004 - 18:44:15 GMT

  • Next message: ali sir olgac: "RE: [cisco-ttl] stolen --VIRUS--"

    merhaba cumhur,
    bilgi icin tesekkurler ama orada okudugum soyle bir sey var

    When automatic medium-dependent interface crossover (Auto-MDIX) is enabled
    on an interface, the interface automatically detects the required cable
    connection type (straight through or crossover) and configures the
    connection appropriately. When connecting switches without the Auto-MDIX
    feature, you must use straight-through cables to connect to devices such as
    servers, workstations, or routers and crossover cables to connect to other
    switches or repeaters

    yani, Auto MDIX desteklemeyen PC gibi cihazlar icin cross-over kablo
    oneriliyor. ama dedigim gibi bende PC'ler cross ile calisti sadece
    printerlar calismadi... bir de desteklenen platformlara baktim aralarinda
    2950 yok. benim bagladigim switch 2950ydi ve 6509'a bagliydi.

    tsk
    tayfun

    -----Original Message-----
    From: Cumhur [mailto:yahoo_at_cumhur.com]
    Sent: Tuesday, 2 March 2004 10:51 a.m.
    To: cisco-ttl_at_yahoogroups.com
    Subject: RE: [cisco-ttl] 2950 switch

    Merhabalar,

    Appendix C: Explanation of Auto-MDIX and Supported Switch Platforms
    http://www.cisco.com/warp/public/473/3.html#appc

    Sanirim artik bir cok uretici bu ozelligi destekliyor , lakin cross
    kablollari yanimizdan ayirmamakta fayda var.

    Cumhur
      
    -----Original Message-----
    From: Tayfun Tuna [mailto:t.tuna_at_auckland.ac.nz]
    Sent: Monday, March 01, 2004 23:27
    To: 'cisco-ttl_at_yahoogroups.com'
    Subject: [cisco-ttl] 2950 switch

    merhaba arkadaslar

    gecenlerde yeni kurdugum bir 2950 switch'e yanlislikla uplink kablosu olarak
    normal ethernet kablosu taktim sonra yanlisimi farkettim ama bu arada iki
    switch arasi link "up" olmustu, degistirip yerine cross cable kullandigimda
    yine port'larin up oldugunu gordum. denemek icin herhangi bir bilgisayari
    cross ile bagladigimda yine PC'nin calistigini gordum. sadece network
    printer'lar sorun cikardi.

    benim bildiklerim mi yanlis yoksa, switch-switch baglantisinda cross,
    PC-switch baglantisinda normal kablo kullanmak gerekmiyor mu. ya da Cisco
    kendisini adapte edebilecek bir sey mi buldu

    tsk
    tayfun

    ---
    Outgoing mail is certified Virus Free.
    Checked by AVG anti-virus system (http://www.grisoft.com).
    Version: 6.0.601 / Virus Database: 382 - Release Date: 29-02-2004
     
    Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi
    bulunmamaktadir. 
    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
    e-posta gönderebilirsiniz. 
    Yahoo! Groups Links
     
    Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi bulunmamaktadir. 
    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz. 
    Yahoo! Groups Links
    <*> To visit your group on the web, go to:
         http://groups.yahoo.com/group/cisco-ttl/
    <*> To unsubscribe from this group, send an email to:
         cisco-ttl-unsubscribe_at_yahoogroups.com
    <*> Your use of Yahoo! Groups is subject to:
         http://docs.yahoo.com/info/terms/
     
    


    This archive was generated by hypermail 2.1.5 : Tue Mar 02 2004 - 22:53:55 GMT