RE: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica e diyorum.

From: Ozgur ERGEN (ozgur.ergen_at_siemens.com.tr)
Date: Thu Dec 25 2003 - 06:37:59 GMT

  • Next message: Ozgur ERGEN: "RE: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica e diyorum."

    Merhabalar,

    Her iki router'da da "show dsl interface atm0/0" komutlarinin ciktilarini da
    gonderebilir misiniz?

    Kolay gelsin.

    Ozgur Ergen
    SIEMENS
    ICN S

    -----Original Message-----
    From: bdikici [mailto:bdikici_at_yahoo.com]
    Sent: Wednesday, December 24, 2003 23:48
    To: cisco-ttl_at_yahoogroups.com
    Subject: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica
    ediyorum.

    Merhaba ,

    2 adet Cisco 1751-V uzerine takili WIC-1SHDSL kart uzerinden back to
    back baglanti saglamaya calisiyorum. Fakat bir turlu baglanti
    saglayamadim.Conf.lari asagida belirtiyorum. elimde 3 adet g.shdsl
    kart var. acaba kart mi bozuk dedim. degistirme yaptim gene olmadi.
    router uzerinde slot 0 dan slot 1 e taktim. gene olmadi. arada cisco
    nun orjinal kablosunu kullaniyorum.acaba o mu bozuk dedim. birebir
    rj-
    11 kablo yaptim.gene olmadi. routerlar icin c1700-sv8y7-mz.123-
    4.T.bin kodlu software i cekip yuklemistim , gshdsl karti gormeleri
    icin.acaba dedim software demi birsey var. gittim en son software
    olan c1700-sv8y7-mz.123-5a.bin kodlu software i cekip her iki router
    a yukledim.gene olmadi. g.shdsl kartin uzerindeki cd isigini bir
    turlu yaktiramadim. bu isik yanmayinca haberlesmenin olmamasi gayet
    dogal. Bence fiziksel katmanda bir problem var.

    surekli , show int ile bakinca " ATM1/0 is down, line protocol is
    down " gorunuyor. atm1/0 is down i up yapabilsem fiziksel problemden
    kurtulacam ama olmuyor malesef. debug i aktif hale getirdim.

    *Mar 1 00:20:08.903: ATM1/0 dslsar_1a_reset: PLIM type is 19, Rate
    is 3200Mbps
    *Mar 1 00:20:08.903: ATM1/0 dslsar_1a_shutdown: state=4
    *Mar 1 00:20:08.903: dslsar disable ATM1/0

    *Mar 1 00:20:08.935: %GSI-6-RESET: Interface ATM1/0, bringing up the
    line. It m
    ay take several seconds for the line to be active.
    *Mar 1 00:20:08.935: Resetting ATM1/0
    *Mar 1 00:20:08.935: dslsar_1a_config(ATM1/0)
    *Mar 1 00:20:08.939: dslsar_1a_enable(ATM1/0)
    *Mar 1 00:20:08.939: ATM1/0: dslsar_init(822CB098,FALSE)
    *Mar 1 00:20:08.939: dslsar disable ATM1/0

    *Mar 1 00:20:09.287: ATM1/0 dslsar_init: DSLSAR TXRX disabled

    *Mar 1 00:20:09.783: ATM1/0 dslsar_1a_enable: restarting VCs: 0
    *Mar 1 00:20:09.783: (ATM1/0)1a_enable,calling atm_activate_pvc, vcd
    = 1, vc =
    0x82620B28adb->flags = 0x4800C
    *Mar 1 00:20:09.787: dslsar disable ATM1/0

    seklinde mesajlar geliyor. Sizce problem nereden kaynaklanabilir ?

    CO
    Router#sh run
    Building configuration...

    Current configuration : 844 bytes
    !
    version 12.3
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname Router
    !
    boot-start-marker
    boot-end-marker
    !
    !
    memory-size iomem 20
    mmi polling-interval 60
    no mmi auto-configure
    no mmi pvc
    mmi snmp-timeout 180
    no aaa new-model
    ip subnet-zero
    !
    !
    --More--
    !
    ip cef
    !
    !
    interface ATM0/0
    no ip address
    no atm ilmi-keepalive
    dsl equipment-type CO
    dsl operating-mode GSHDSL symmetric annex B
    dsl linerate AUTO
    --More--
    !
    interface ATM0/0.2 point-to-point
    ip address 192.168.4.1 255.255.255.0
    pvc data 8/35
    encapsulation aal5snap
    !
    !
    interface FastEthernet0/0
    ip address 192.168.1.1 255.255.255.0
    speed auto
    !
    ip classless
    ip route 192.168.3.0 255.255.255.0 ATM0/0 192.168.4.2
    no ip http server
    !
    line con 0
    line aux 0
    --More--
    !
    !
    line con 0
    line aux 0
    line vty 0 4
    login
    !
    !
    end

    CPE
    Router#sh run
    Building configuration...

    Current configuration : 867 bytes
    !
    version 12.3
    service timestamps debug datetime msec
    service timestamps log datetime msec
    no service password-encryption
    !
    hostname Router
    !
    boot-start-marker
    boot-end-marker
    !
    !
    memory-size iomem 20
    mmi polling-interval 60
    no mmi auto-configure
    no mmi pvc
    mmi snmp-timeout 180
    no aaa new-model
    ip subnet-zero
    !
    !
    --More--
    !
    ip cef
    !
    !
    interface FastEthernet0/0
    ip address 192.168.3.1 255.255.255.0
    speed auto
    !
    interface ATM1/0
    no ip address
    --More--
    no atm ilmi-keepalive
    dsl equipment-type CPE
    dsl operating-mode GSHDSL symmetric annex B
    dsl linerate AUTO
    !
    interface ATM1/0.2 point-to-point
    ip address 192.168.4.2 255.255.255.0
    pvc data 8/35
    encapsulation aal5snap
    !
    !
    ip classless
    ip route 192.168.1.0 255.255.255.0 ATM1/0 192.168.4.1
    no ip http server
    !
    !
    line con 0
    line aux 0
    --More--
    line vty 0 4
    login
    !
    no scheduler allocate
    !
    end

    Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi
    bulunmamaktadir.

    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
    e-posta gönderebilirsiniz.

    Yahoo! Groups Links

    To visit your group on the web, go to:
     http://groups.yahoo.com/group/cisco-ttl/

    To unsubscribe from this group, send an email to:
     cisco-ttl-unsubscribe_at_yahoogroups.com

    Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/

    Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.

    Yahoo! Groups Links

    To visit your group on the web, go to:
     http://groups.yahoo.com/group/cisco-ttl/

    To unsubscribe from this group, send an email to:
     cisco-ttl-unsubscribe_at_yahoogroups.com

    Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/



    This archive was generated by hypermail 2.1.5 : Thu Dec 25 2003 - 11:46:15 GMT