Re: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica ediyorum.

From: Devrim Yener KUCUK (dkucuk_at_cisco.com)
Date: Thu Dec 25 2003 - 07:01:39 GMT

  • Next message: bdikici: "[cisco-ttl] Re: WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica ediyorum."

    Zafer

    Burda Christmas (persembe cuma tatiliz) , onun icin daha tam uyanamadik
    herhalde :)

    WIC , RJ11 kablo kullaniyo (6 pin)
    Ortadaki 2 pinin kroslanmasi gerek ( 3 tip and 4 ring)

    http://www.cisco.com/en/US/partner/products/hw/routers/ps259/products_data_s
    heet09186a00800921f0.html

    Devrim

    ----- Original Message -----
    From: <ZaferP_at_koc.net>
    To: <cisco-ttl_at_yahoogroups.com>
    Sent: Thursday, December 25, 2003 9:51 AM
    Subject: RE: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica
    ediyorum.

    > Selam ,
    >
    > Bence kabloda 3-4 nolu pinler crosslanmalı
    >
    > 3 XDSL_Tip
    >
    > 4 XDSL_Ring
    >
    > Düz olursa tip-tip, ring-ring'e gelmiş oluyor. Uçları değiştirerek denedin
    mi?
    >
    > İyi çalışmalar..
    >
    > -----Original Message-----
    > From: bdikici [mailto:bdikici_at_yahoo.com]
    > Sent: Wednesday, December 24, 2003 11:48 PM
    > To: cisco-ttl_at_yahoogroups.com
    > Subject: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica
    ediyorum.
    >
    >
    > Merhaba ,
    >
    > 2 adet Cisco 1751-V uzerine takili WIC-1SHDSL kart uzerinden back to back
    baglanti saglamaya calisiyorum. Fakat bir turlu baglanti
    saglayamadim.Conf.lari asagida belirtiyorum. elimde 3 adet g.shdsl kart var.
    acaba kart mi bozuk dedim. degistirme yaptim gene olmadi. router uzerinde
    slot 0 dan slot 1 e taktim. gene olmadi. arada cisco nun orjinal kablosunu
    kullaniyorum.acaba o mu bozuk dedim. birebir
    > rj-
    > 11 kablo yaptim.gene olmadi. routerlar icin c1700-sv8y7-mz.123- 4.T.bin
    kodlu software i cekip yuklemistim , gshdsl karti gormeleri icin.acaba dedim
    software demi birsey var. gittim en son software olan
    c1700-sv8y7-mz.123-5a.bin kodlu software i cekip her iki router a
    yukledim.gene olmadi. g.shdsl kartin uzerindeki cd isigini bir turlu
    yaktiramadim. bu isik yanmayinca haberlesmenin olmamasi gayet dogal. Bence
    fiziksel katmanda bir problem var.
    >
    > surekli , show int ile bakinca " ATM1/0 is down, line protocol is down "
    gorunuyor. atm1/0 is down i up yapabilsem fiziksel problemden kurtulacam ama
    olmuyor malesef. debug i aktif hale getirdim.
    >
    > *Mar 1 00:20:08.903: ATM1/0 dslsar_1a_reset: PLIM type is 19, Rate is
    3200Mbps *Mar 1 00:20:08.903: ATM1/0 dslsar_1a_shutdown: state=4 *Mar 1
    00:20:08.903: dslsar disable ATM1/0
    >
    > *Mar 1 00:20:08.935: %GSI-6-RESET: Interface ATM1/0, bringing up the line.
    It m ay take several seconds for the line to be active. *Mar 1 00:20:08.935:
    Resetting ATM1/0 *Mar 1 00:20:08.935: dslsar_1a_config(ATM1/0) *Mar 1
    00:20:08.939: dslsar_1a_enable(ATM1/0) *Mar 1 00:20:08.939: ATM1/0:
    dslsar_init(822CB098,FALSE) *Mar 1 00:20:08.939: dslsar disable ATM1/0
    >
    > *Mar 1 00:20:09.287: ATM1/0 dslsar_init: DSLSAR TXRX disabled
    >
    > *Mar 1 00:20:09.783: ATM1/0 dslsar_1a_enable: restarting VCs: 0 *Mar 1
    00:20:09.783: (ATM1/0)1a_enable,calling atm_activate_pvc, vcd = 1, vc =
    > 0x82620B28adb->flags = 0x4800C
    > *Mar 1 00:20:09.787: dslsar disable ATM1/0
    >
    > seklinde mesajlar geliyor. Sizce problem nereden kaynaklanabilir ?
    >
    >
    >
    >
    > CO
    > Router#sh run
    > Building configuration...
    >
    > Current configuration : 844 bytes
    > !
    > version 12.3
    > service timestamps debug datetime msec
    > service timestamps log datetime msec
    > no service password-encryption
    > !
    > hostname Router
    > !
    > boot-start-marker
    > boot-end-marker
    > !
    > !
    > memory-size iomem 20
    > mmi polling-interval 60
    > no mmi auto-configure
    > no mmi pvc
    > mmi snmp-timeout 180
    > no aaa new-model
    > ip subnet-zero
    > !
    > !
    > --More--
    > !
    > ip cef
    > !
    > !
    > interface ATM0/0
    > no ip address
    > no atm ilmi-keepalive
    > dsl equipment-type CO
    > dsl operating-mode GSHDSL symmetric annex B
    > dsl linerate AUTO
    > --More--
    > !
    > interface ATM0/0.2 point-to-point
    > ip address 192.168.4.1 255.255.255.0
    > pvc data 8/35
    > encapsulation aal5snap
    > !
    > !
    > interface FastEthernet0/0
    > ip address 192.168.1.1 255.255.255.0
    > speed auto
    > !
    > ip classless
    > ip route 192.168.3.0 255.255.255.0 ATM0/0 192.168.4.2
    > no ip http server
    > !
    > line con 0
    > line aux 0
    > --More--
    > !
    > !
    > line con 0
    > line aux 0
    > line vty 0 4
    > login
    > !
    > !
    > end
    >
    >
    >
    >
    >
    >
    >
    > CPE
    > Router#sh run
    > Building configuration...
    >
    > Current configuration : 867 bytes
    > !
    > version 12.3
    > service timestamps debug datetime msec
    > service timestamps log datetime msec
    > no service password-encryption
    > !
    > hostname Router
    > !
    > boot-start-marker
    > boot-end-marker
    > !
    > !
    > memory-size iomem 20
    > mmi polling-interval 60
    > no mmi auto-configure
    > no mmi pvc
    > mmi snmp-timeout 180
    > no aaa new-model
    > ip subnet-zero
    > !
    > !
    > --More--
    > !
    > ip cef
    > !
    > !
    > interface FastEthernet0/0
    > ip address 192.168.3.1 255.255.255.0
    > speed auto
    > !
    > interface ATM1/0
    > no ip address
    > --More--
    > no atm ilmi-keepalive
    > dsl equipment-type CPE
    > dsl operating-mode GSHDSL symmetric annex B
    > dsl linerate AUTO
    > !
    > interface ATM1/0.2 point-to-point
    > ip address 192.168.4.2 255.255.255.0
    > pvc data 8/35
    > encapsulation aal5snap
    > !
    > !
    > ip classless
    > ip route 192.168.1.0 255.255.255.0 ATM1/0 192.168.4.1
    > no ip http server
    > !
    > !
    > line con 0
    > line aux 0
    > --More--
    > line vty 0 4
    > login
    > !
    > no scheduler allocate
    > !
    > end
    >
    >
    >
    > Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi
    bulunmamaktadir.
    >
    > Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
    e-posta gönderebilirsiniz.
    >
    >
    > Yahoo! Groups Links
    >
    > To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/
    >
    > To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe_at_yahoogroups.com
    >
    > Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
    >
    >
    ____________________________________________________________________________
    _________________________________________________________________
    >
    > Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger
    bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde
    kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta
    mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj
    kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac
    icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta
    mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak
    yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol
    ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek
    zararlardan dogacak hicbir sorumlulugu kabul etmez.
    >
    > This message is intended solely for the use of the individual or entity to
    whom it is addressed , and may contain confidential information. If you are
    not the intended recipient of this message or you receive this mail in
    error, you should refrain from making any use of the contents and from
    opening any attachment. In that case, please notify the sender immediately
    and return the message to the sender, then, delete and destroy all copies.
    This e-mail message, could not be copied, published or sold for any reason.
    This e-mail message has been swept by anti-virus systems for the presence of
    computer viruses. In doing so, however, sender cannot warrant that virus
    or other forms of data corruption may not be present and do not take any
    responsibility in any occurrence.
    >
    >
    ____________________________________________________________________________
    _________________________________________________________________
    >
    >
    >
    >
    >
    >
    >
    >
    > Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi
    bulunmamaktadir.
    >
    > Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir
    e-posta gönderebilirsiniz.
    >
    >
    > Yahoo! Groups Links
    >
    > To visit your group on the web, go to:
    > http://groups.yahoo.com/group/cisco-ttl/
    >
    > To unsubscribe from this group, send an email to:
    > cisco-ttl-unsubscribe_at_yahoogroups.com
    >
    > Your use of Yahoo! Groups is subject to:
    > http://docs.yahoo.com/info/terms/
    >
    >

    Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi bulunmamaktadir.

    Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.

    ------------------------ Yahoo! Groups Sponsor ---------------------~-->
    Buy Ink Cartridges or Refill Kits for your HP, Epson, Canon or Lexmark
    Printer at MyInks.com. Free s/h on orders $50 or more to the US & Canada.
    http://www.c1tracking.com/l.asp?cid=5511
    http://us.click.yahoo.com/mOAaAA/3exGAA/qnsNAA/26EolB/TM
    ---------------------------------------------------------------------~->

    Yahoo! Groups Links

    To visit your group on the web, go to:
     http://groups.yahoo.com/group/cisco-ttl/

    To unsubscribe from this group, send an email to:
     cisco-ttl-unsubscribe_at_yahoogroups.com

    Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/



    This archive was generated by hypermail 2.1.5 : Thu Dec 25 2003 - 11:02:27 GMT