Re: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica ediyorum.

From: Devrim Yener KUCUK (dkucuk_at_cisco.com)
Date: Thu Dec 25 2003 - 06:19:49 GMT

  • Next message: ZaferP_at_koc.net: "RE: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica ediyorum."

    Merhaba,

    IOS icin:
    1751-->WIC-1SHDSL support-->12.2(4)XL--> "ADSL" feature set gerekli
    http://www.cisco.com/warp/customer/620/ios_12_2_4_xl.shtml
    (
    12.2(4)XL is an X release optimized for the 1700, 2600, 3600 and ICS7700 platforms. This release is based upon the 12.2(4)T maintenance release
    )
    http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122relnt/1700/rn1700xl.htm

    Back-to-back baglanti icin ornek:

     router 1

     dls equipment-type cpe <===
     dsl operating-mode GSHDSL symmetric annex B
     dsl line-rate auto

     router 2:

     dls equipment-type co <===
     dsl operating-mode GSHDSL symmetric annex B
     dsl line-rate auto
     
    back-to-back icin duz kablo kullanilacak (straight through cable)

    Calisan set-up:
     
     router 1:

     interface ATM0
      ip address 192.100.100.1 255.255.255.0
      no atm ilmi-keepalive
      pvc 8/35
       protocol ip 192.100.100.2
       encapsulation aal5mux ip
      !
      dsl equipment-type CPE
      dsl operating-mode GSHDSL symmetric annex B
      dsl linerate AUTO

     router 2:
     interface ATM0
      ip address 192.100.100.2 255.255.255.0
      no atm ilmi-keepalive
      pvc 8/35
       protocol ip 192.100.100.1
       encapsulation aal5mux ip
      !
      dsl equipment-type CO
      dsl operating-mode GSHDSL symmetric annex B
      dsl linerate AUTO

    Kolay gelsin

    Devrim
      ----- Original Message -----
      From: bdikici
      To: cisco-ttl_at_yahoogroups.com
      Sent: Wednesday, December 24, 2003 10:48 PM
      Subject: [cisco-ttl] WIC-1SHDSL ve 1751-V - acil yardimlarinizi rica ediyorum.

      Merhaba ,

      2 adet Cisco 1751-V uzerine takili WIC-1SHDSL kart uzerinden back to
      back baglanti saglamaya calisiyorum. Fakat bir turlu baglanti
      saglayamadim.Conf.lari asagida belirtiyorum. elimde 3 adet g.shdsl
      kart var. acaba kart mi bozuk dedim. degistirme yaptim gene olmadi.
      router uzerinde slot 0 dan slot 1 e taktim. gene olmadi. arada cisco
      nun orjinal kablosunu kullaniyorum.acaba o mu bozuk dedim. birebir
      rj-
      11 kablo yaptim.gene olmadi. routerlar icin c1700-sv8y7-mz.123-
      4.T.bin kodlu software i cekip yuklemistim , gshdsl karti gormeleri
      icin.acaba dedim software demi birsey var. gittim en son software
      olan c1700-sv8y7-mz.123-5a.bin kodlu software i cekip her iki router
      a yukledim.gene olmadi. g.shdsl kartin uzerindeki cd isigini bir
      turlu yaktiramadim. bu isik yanmayinca haberlesmenin olmamasi gayet
      dogal. Bence fiziksel katmanda bir problem var.

      surekli , show int ile bakinca " ATM1/0 is down, line protocol is
      down " gorunuyor. atm1/0 is down i up yapabilsem fiziksel problemden
      kurtulacam ama olmuyor malesef. debug i aktif hale getirdim.

      *Mar 1 00:20:08.903: ATM1/0 dslsar_1a_reset: PLIM type is 19, Rate
      is 3200Mbps
      *Mar 1 00:20:08.903: ATM1/0 dslsar_1a_shutdown: state=4
      *Mar 1 00:20:08.903: dslsar disable ATM1/0

      *Mar 1 00:20:08.935: %GSI-6-RESET: Interface ATM1/0, bringing up the
      line. It m
      ay take several seconds for the line to be active.
      *Mar 1 00:20:08.935: Resetting ATM1/0
      *Mar 1 00:20:08.935: dslsar_1a_config(ATM1/0)
      *Mar 1 00:20:08.939: dslsar_1a_enable(ATM1/0)
      *Mar 1 00:20:08.939: ATM1/0: dslsar_init(822CB098,FALSE)
      *Mar 1 00:20:08.939: dslsar disable ATM1/0

      *Mar 1 00:20:09.287: ATM1/0 dslsar_init: DSLSAR TXRX disabled

      *Mar 1 00:20:09.783: ATM1/0 dslsar_1a_enable: restarting VCs: 0
      *Mar 1 00:20:09.783: (ATM1/0)1a_enable,calling atm_activate_pvc, vcd
      = 1, vc =
      0x82620B28adb->flags = 0x4800C
      *Mar 1 00:20:09.787: dslsar disable ATM1/0

      seklinde mesajlar geliyor. Sizce problem nereden kaynaklanabilir ?

      CO
      Router#sh run
      Building configuration...

      Current configuration : 844 bytes
      !
      version 12.3
      service timestamps debug datetime msec
      service timestamps log datetime msec
      no service password-encryption
      !
      hostname Router
      !
      boot-start-marker
      boot-end-marker
      !
      !
      memory-size iomem 20
      mmi polling-interval 60
      no mmi auto-configure
      no mmi pvc
      mmi snmp-timeout 180
      no aaa new-model
      ip subnet-zero
      !
      !
      --More--
      !
      ip cef
      !
      !
      interface ATM0/0
      no ip address
      no atm ilmi-keepalive
      dsl equipment-type CO
      dsl operating-mode GSHDSL symmetric annex B
      dsl linerate AUTO
      --More--
      !
      interface ATM0/0.2 point-to-point
      ip address 192.168.4.1 255.255.255.0
      pvc data 8/35
      encapsulation aal5snap
      !
      !
      interface FastEthernet0/0
      ip address 192.168.1.1 255.255.255.0
      speed auto
      !
      ip classless
      ip route 192.168.3.0 255.255.255.0 ATM0/0 192.168.4.2
      no ip http server
      !
      line con 0
      line aux 0
      --More--
      !
      !
      line con 0
      line aux 0
      line vty 0 4
      login
      !
      !
      end

      CPE
      Router#sh run
      Building configuration...

      Current configuration : 867 bytes
      !
      version 12.3
      service timestamps debug datetime msec
      service timestamps log datetime msec
      no service password-encryption
      !
      hostname Router
      !
      boot-start-marker
      boot-end-marker
      !
      !
      memory-size iomem 20
      mmi polling-interval 60
      no mmi auto-configure
      no mmi pvc
      mmi snmp-timeout 180
      no aaa new-model
      ip subnet-zero
      !
      !
      --More--
      !
      ip cef
      !
      !
      interface FastEthernet0/0
      ip address 192.168.3.1 255.255.255.0
      speed auto
      !
      interface ATM1/0
      no ip address
      --More--
      no atm ilmi-keepalive
      dsl equipment-type CPE
      dsl operating-mode GSHDSL symmetric annex B
      dsl linerate AUTO
      !
      interface ATM1/0.2 point-to-point
      ip address 192.168.4.2 255.255.255.0
      pvc data 8/35
      encapsulation aal5snap
      !
      !
      ip classless
      ip route 192.168.1.0 255.255.255.0 ATM1/0 192.168.4.1
      no ip http server
      !
      !
      line con 0
      line aux 0
      --More--
      line vty 0 4
      login
      !
      no scheduler allocate
      !
      end

      Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi bulunmamaktadir.

      Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine bir e-posta gönderebilirsiniz.

            Yahoo! Groups Sponsor
                  ADVERTISEMENT
                 
           
           

    ------------------------------------------------------------------------------
      Yahoo! Groups Links

        a.. To visit your group on the web, go to:
        http://groups.yahoo.com/group/cisco-ttl/
          
        b.. To unsubscribe from this group, send an email to:
        cisco-ttl-unsubscribe_at_yahoogroups.com
          
        c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.



    This archive was generated by hypermail 2.1.5 : Thu Dec 25 2003 - 10:20:38 GMT