|
|
Re: [cisco-ttl] 2.SSID ve Farklı Ip
From: Ahmet KAFTAN <kaftana_at_....>
Date: Thu, 1 Jul 2010 12:51:59 -0700 (PDT)
Anladigim kadar ile sirket kullanicilari ile misafir kullanicilarini ayirmak istiyorsun ama bunu farkli vlanlar kullanmadan yapmak istiyorsun, bunu neden yapmak istedin bilemiyorum ama asagida linkini gonderdigim dokumana gore: Requirements for Configuring Multiple BSSIDs To configure multiple BSSIDs, your access points must meet these minimum requirements: •VLANs must be configured http://www.cisco.com/en/US/docs/wireless/access_point/12.4_3g_JA/configuration/guide/s43ssid.html dokumandan baska bir alinti In fundamental terms, the key to configuring an access point to connect to a specific VLAN is to configure its SSID to recognize that VLAN. Because VLANs are identified by a VLAN ID or name, it follows that if the SSID on an access point is configured to recognize a specific VLAN ID or name, a connection to the VLAN is established. When this connection is made, associated wireless client devices having the same SSID can access the VLAN through the access point. The VLAN processes data to and from the clients the same way that it processes data to and from wired connections. You can configure up to 16 SSIDs on your access point, so you can support up to 16 VLANs. You can assign only one SSID to a VLAN iyi calismalar From: Emre BALCI <emrebalci_at_yahoo.com> To: cisco-ttl_at_yahoogroups.com Sent: Thu, May 27, 2010 3:23:26 PM Subject: [cisco-ttl] 2.SSID ve Farklı Ip
Herkese selamlar..
Iyi Calısmalar.. [Non-text portions of this message have been removed] Received on Fri Jul 02 2010 - 10:31:03 CEST This archive was generated by hypermail 2.2.0 : Fri Jul 02 2010 - 10:31:04 CEST |