[cisco-ttl] 3550'de Band genişliği IP bazlı ve port bazlı kısıtlama

Merhabalar,

Cisco 3550 Switch'de IP bazlı ve port bazlı band genişliği kısıtlaması yapmak istiyorum.

Aşağıdaki şekilde 256 Kbps hızı ile 192.168.1.111 IP'sini kısıtlamak istiyorum.Aşağıdaki şekilde config yaptım.Ancak access-list kontrol ettiğimde match etmediğini görüyorum.

Ayrıca port bazlı nasıl kısıtlayabilirim ? Örnek confige ihtiyacım var.

Nerede eksikliğim var ? Fikirlerinizi rica ederim.

mls qos aggregate-policer MUSTERI_A_256 256000 8000 exceed-action drop mls qos

class-map match-all IP_CLASS

   description IP class
  match access-group 1
!
!
policy-map POLICY
  description PC KISITLA
  class IP_CLASS

     police aggregate MUSTERI_A_256
!
interface FastEthernet0/1
  description 192.168.1.254 bagli (fw ic bacak)   switchport mode access
  spanning-tree bpduguard enable
  service-policy input POLICY

!

interface FastEthernet0/2
  description 192.168.1.111 bagli
  switchport mode access
  spanning-tree portfast
  spanning-tree bpduguard enable
!

interface Vlan1
  ip address 192.168.1.222 255.255.255.0 !
ip route 0.0.0.0 0.0.0.0 192.168.1.254
!
access-list 1 permit 192.168.1.111

TEST_3550#sh IP ACCEss-lists
Standard IP access list 1

     10 permit 166.1.1.111

TEST_3550#SH POLicy-maP INterface
  FastEthernet0/1

   Service-policy input: POLICY

     Class-map: IP_CLASS (match-all)
       0 packets, 0 bytes
       5 minute offered rate 0 bps, drop rate 0 bps
       Match: access-group 1

     Class-map: class-default (match-any)
       0 packets, 0 bytes
       5 minute offered rate 0 bps, drop rate 0 bps
       Match: any
         0 packets, 0 bytes
         5 minute rate 0 bps

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Disclaimer: Some of the individuals posting to this site, including 
the moderators, work for Cisco Systems, Inc. Opinions expressed here and in any corresponding comments are the personal opinions of the original authors, not those of Cisco.
 Yahoo! Groups Links



<*> To visit your group on the web, go to:

    http://groups.yahoo.com/group/cisco-ttl/



<*> Your email settings:

    Individual Email | Traditional



<*> To change settings online go to:

    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)



<*> To change settings via email:

    cisco-ttl-digest_at_yahoogroups.com 
    cisco-ttl-fullfeatured_at_yahoogroups.com



<*> To unsubscribe from this group, send an email to:

    cisco-ttl-unsubscribe_at_yahoogroups.com



<*> Your use of Yahoo! Groups is subject to:

    http://docs.yahoo.com/info/terms/