Re: [cisco-ttl] Serial0/1 is up, line protocol is down (looped)

From: Ceyhun Taymez <ctaymez_at_....>
Date: Sun, 24 May 2009 10:55:12 -0400

Gurkan Selamlar,

Gorunus o ki hattin bir yerinde senin router'ina loop verilmis, TT tarafindan hattin bir yerinde unutulmus fiziksel loop olabilir veya TT nin routerindan soft-loop geliyor da olabilir. Bu loop nereden geliyor onu arastirmalisiniz. Loop'u kaldirmadikca up/up olmayacaktir. Bir de kendi interface konfigurasyonunun gonderisrsen ona da bir goz atabiliriz.

Kolay gelsin,

Ceyhun

From: gUrkAn
Sent: Thursday, May 21, 2009 12:25 PM
To: cisco-ttl_at_yahoogroups.com
Subject: [cisco-ttl] Serial0/1 is up, line protocol is down (looped)

Selamlar,

Aşağıdaki ekranı alıyorum.TT kendisinden kaynaklana bir sorun olmadığını belirtiyor. Encapsulation moe u HDLC ye çektik modem değiştirdik ama bir sonuç olmadı.TT ye kendilerinden kaynaklandığı konusunda ısrarcı mı olmalıyım ? Teşekkürler.

Gürkan
Serial0/1 is up, line protocol is down (looped)   Hardware is PowerQUICC Serial
  Description: Villa'nin hatti
  MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,

     reliability 255/255, txload 1/255, rxload 1/255   Encapsulation PPP, LCP Listen, multilink Closed   Closed: BACP, loopback not set
  Last input 00:00:23, output 00:00:23, output hang never   Last clearing of "show interface" counters 00:12:27   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0   Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)

     Conversations  0/1/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 1536 kilobits/sec

  5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec

     300 packets input, 7050 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     16 input errors, 0 CRC, 16 frame, 0 overrun, 0 ignored, 0 abort
     300 packets output, 7050 bytes, 0 underruns
     0 output errors, 0 collisions, 41 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

Serial1/0 is up, line protocol is down (looped)   Hardware is DSCC4 Serial
  Description: NEWLINE for DATA
  Internet address is 172.25.0.1/16
  MTU 1500 bytes, BW 2048 Kbit, DLY 20000 usec,

     reliability 255/255, txload 1/255, rxload 1/255   Encapsulation PPP, LCP Listen, loopback not set   Last input 00:00:24, output 00:00:24, output hang never   Last clearing of "show interface" counters 00:12:28   Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0   Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops)

     Conversations  0/1/256 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
     Available Bandwidth 1536 kilobits/sec

  5 minute input rate 0 bits/sec, 0 packets/sec   5 minute output rate 0 bits/sec, 0 packets/sec

     300 packets input, 4200 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     300 packets output, 4200 bytes, 0 underruns
     0 output errors, 0 collisions, 40 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
     DCD=up  DSR=up  DTR=up  RTS=up  CTS=up

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]
Received on Sun May 24 2009 - 16:57:47 CEST