[cisco-ttl] aironet 1300 AP problem

From: ersan tombalak <tombalak80_at_....>
Date: Wed, 11 Apr 2007 00:52:47 -0700 (PDT)

cihazýmýz fabrika içerisinde yerden yaklaþýk olarak 20 m yükseklikte konumlandýrýlmýþ durumda ve el terminalleri kullanýlýyor, aþaðýdaki configurasyonda eski tip olan el cihazlarý problemsiz çalýþyor fakat yeni tip olan el cihazlarýnda çekim gücü çok zayýf kalýyor. Baþka marka bir AP kullandýðýmýzda (Datron) iki farklý el cihazý gayet iyi çalýþýyor. Configrusyonda ki problem nedir. Yeni el cihazý 802.1b..    

  konfigurasyon;    

  version 12.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!

hostname CISCOAP
!

enable secret 5 $1$CYtp$EohhLjb05hn9//ST.bYEW1
!

clock timezone GMT 2
ip subnet-zero
!
!

dot11 ssid KASCISCOAP

   vlan 1
   authentication shared
   guest-mode
!
!
!

username xxx privilege 15 password 7 072C285F4D06
!

bridge irb
!
!

interface Dot11Radio0
 no ip address
 no ip route-cache
 !
 encryption vlan 1 key 1 size 40bit 7 B6203102F53D transmit-key  encryption vlan 1 mode ciphers wep40
 !
 ssid KASCISCOAP
 !
 speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0  channel 2462
 station-role root access-point
 cca 75
 concatenation
 antenna receive right
 antenna transmit right
 antenna gain 3
 l2-filter bridge-group-acl
 infrastructure-client
!

interface Dot11Radio0.1
 encapsulation dot1Q 1 native
 no ip route-cache

 bridge-group 1
 bridge-group 1 subscriber-loop-control
 bridge-group 1 block-unknown-source

 no bridge-group 1 source-learning
 no bridge-group 1 unicast-flooding
 bridge-group 1 spanning-disabled
!

interface FastEthernet0
 no ip address
 no ip route-cache
!

interface FastEthernet0.1
 encapsulation dot1Q 1 native
 no ip route-cache
 bridge-group 1
 no bridge-group 1 source-learning
 bridge-group 1 spanning-disabled
!

interface BVI1
 ip address 10.0.3.210 255.255.255.0
 no ip route-cache
!

ip default-gateway 10.0.3.10
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ip radius source-interface BVI1
!

control-plane
!

bridge 1 route ip
!
!
!

line con 0
 transport preferred all
 transport output all
line vty 0 4
 transport preferred all
 transport input all
 transport output all
line vty 5 15
 transport preferred all
 transport input all
 transport output all
!

end        

---

 Get your own web address.
 Have a HUGE year through Yahoo! Small Business.

[Non-text portions of this message have been removed] Received on Wed Apr 11 2007 - 12:41:20 CEST