RE: [cisco-ttl] Cisco 1721 Flash

From: Yücel BAŞOĞLU <ybasoglu_at_....>
Date: Fri Jan 12 2007 - 07:50:11 CET

Merhaba,

Eger cihaz icerisinde flash dosyasi yoksa ; (ornegin tftp bilgisayarinin ip : 192.168.1.1)

IP_ADDRESS=192.168.1.2
IP_SUBNET_MASK=255.255.255.0
DEFAULT_GATEWAY=192.168.1.1
TFTP_SERVER=192.168.1.1
TFTP_FILE=c870-advsecurityk9-mz.124-4.T
Tftpdnld

Tftp server'da file dosyasini bu sekilde gonderebilir, icerisinde flash dosyasi olmayan routera yukleyebilirsin. Benim basima birkez gelmisti bu sekilde yukleyemedim, console dan gonderdim ama oda asiri uzun suruyor.

Kolay gelsin.

Yucel BASOGLU  

-----Original Message-----
From: cisco-ttl@yahoogroups.com [mailto:cisco-ttl@yahoogroups.com] On Behalf Of Elif KANDYL KARAKA?
Sent: Thursday, January 11, 2007 9:12 AM To: cisco-ttl@yahoogroups.com
Cc: ilker@ilkertemir.com
Subject: [cisco-ttl] Cisco 1721 Flash

Cisco 1721 Router Kullan¹yoruz. Konfigurasyonunu yaparken fabrika ayarlar¹na döner diyerek flash sil komutunu denedim. Router Flashi silindi ve aç¹l¹rken ROMMON modunda açt¹.
http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_ guide_chapter09186a008007cd0e.html#wp1005134 linkindeki rommon komutlar¹ ile flash ¹ tekrar düzeltmek istesemde flash hatas¹ veriyor.

Örnek ªu
rommon 1 > tftpdnld [-r]
usage: tftpdnld [-r]
  Use this command for disaster recovery only to recover an image via TFTP.   Monitor variables are used to set up parameters for the transfer.   (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)   "ctrl-c" or "break" stops the transfer before flash erase begins.   The following variables are REQUIRED to be set for tftpdnld:

            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
  The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default),
2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=7)
          TFTP_TIMEOUT: Overall timeout of operation in seconds


(default=7200)

         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes

(default=1)

  Command line options:
   -r: do not write flash, load to DRAM only and launch image

neden flasha yazam¹yor hangi ayarlar¹ yapmal¹y¹m?

rommon üzerinde confreg yap¹l¹yor...  

---

---

Want to start your own business?
Learn how on Yahoo! Small Business.
http://smallbusiness.yahoo.com/r-index

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links






--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:cisco-ttl-digest@yahoogroups.com 
    mailto:cisco-ttl-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Received on Fri Jan 12 11:08:20 2007