[cisco-ttl] Cisco 1721 Flash

From: Elif KANDİL KARAKAŞ <elif_timur_at_....>
Date: Thu Jan 11 2007 - 08:11:44 CET

Cisco 1721 Router Kullan¹yoruz. Konfigurasyonunu yaparken fabrika ayarlar¹na döner diyerek flash sil komutunu denedim. Router Flashi silindi ve aç¹l¹rken ROMMON modunda açt¹. http://www.cisco.com/en/US/products/hw/routers/ps221/products_configuration_guide_chapter09186a008007cd0e.html#wp1005134 linkindeki rommon komutlar¹ ile flash ¹ tekrar düzeltmek istesemde flash hatas¹ veriyor.

Örnek ªu
rommon 1 > tftpdnld [-r]
usage: tftpdnld [-r]
  Use this command for disaster recovery only to recover an image via TFTP.   Monitor variables are used to set up parameters for the transfer.   (Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)   "ctrl-c" or "break" stops the transfer before flash erase begins.   The following variables are REQUIRED to be set for tftpdnld:

            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
  The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=7)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)

  Command line options:
   -r: do not write flash, load to DRAM only and launch image

neden flasha yazam¹yor hangi ayarlar¹ yapmal¹y¹m?

rommon üzerinde confreg yap¹l¹yor...  

---

Want to start your own business?
Learn how on Yahoo! Small Business.
http://smallbusiness.yahoo.com/r-index

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links



<*> To visit your group on the web, go to:

    http://groups.yahoo.com/group/cisco-ttl/



<*> Your email settings:

    Individual Email | Traditional



<*> To change settings online go to:

    http://groups.yahoo.com/group/cisco-ttl/join
    (Yahoo! ID required)



<*> To change settings via email:

    mailto:cisco-ttl-digest@yahoogroups.com 
    mailto:cisco-ttl-fullfeatured@yahoogroups.com



<*> To unsubscribe from this group, send an email to:

    cisco-ttl-unsubscribe@yahoogroups.com



<*> Your use of Yahoo! Groups is subject to:

    http://docs.yahoo.com/info/terms/
 

Received on Thu Jan 11 11:14:02 2007