[cisco-ttl] Re: 878 Router G.SHDSL Point to Point uygulama erisim problemi

From: halilergun.korkmaz <halilergun.korkmaz_at_....>
Date: Thu Aug 03 2006 - 10:02:56 EEST


Herkese selam,

Bir bilgi daha vereyim ping paketinin size'ini arttirdigimda pingde atamiyorum mtu ile ilgili olabilirmi acaba ?

iyi calismalar

Halil Ergun KORKMAZ

  • In cisco-ttl@yahoogroups.com, "halilergun.korkmaz" <halilergun.korkmaz@...> wrote:
    >
    > Merhaba,
    >
    > 878 G.SHDSL router ile iki lokasyonu Point to Point bagladim ve
    > konfigure ettim bir ofisten diger ofisteki router'a veya herhangi
    > bir client'a ping atabiliyorum ama uygulamalari calistiramiyorum
    > hatta ping atabildigim router'a bile telnet ile ulasamiyorum sorun
    > ne olabilir ? konfigurasyon asagidaki gibi
    >
    >
    > Current configuration : 4465
    > !
    > version 12.4
    > no service pad
    > service tcp-keepalives-in
    > service tcp-keepalives-out
    > service timestamps debug datetime msec localtime show-
    >
    timezone
    >
    > service timestamps log datetime msec localtime show-
    >
    timezone
    > service password-encryption
    > service sequence-numbers
    > !
    > !
    > boot-start-marker
    > boot-end-marker
    > !
    > logging buffered 51200 debugging
    > logging console critical
    > !
    > no aaa new-model
    > !
    > resource policy
    > !
    > clock timezone PCTime 2
    > clock summer-time PCTime date Mar 30
    > 200
    > no ip source-route
    > ip cef
    > no ip dhcp use vrf connected
    > !
    > !
    > !
    > ip tcp synwait-time 10
    > no ip bootp server
    >
    > ip ssh time-out 60
    > ip ssh authentication-retries 2
    > !
    > !
    > !
    > !
    > controller DSL 0
    > mode atm
    > line-term cpe
    > line-mode 2-wire line-zero
    > dsl-mode shdsl symmetric annex B
    > line-rate auto
    > !
    > !
    > !
    > !
    > interface BRI0
    > no ip address
    > no ip redirects
    > no ip unreachables
    > no ip proxy-arp
    > encapsulation hdlc
    > ip route-cache flow
    > shutdown
    > !
    > interface ATM0
    > no ip address
    > no atm ilmi-keepalive
    > !
    > interface ATM0.1 point-to-point
    > description $FW_OUTSIDE$$ES_WAN$
    > no snmp trap link-status
    > pvc 0/35
    > encapsulation aal5snap
    > protocol ppp dialer
    > dialer pool-member 1
    > !
    > !
    > interface FastEthernet0
    > !
    > interface FastEthernet1
    > !
    > interface FastEthernet2
    > !
    > interface FastEthernet3
    > !
    > interface Vlan1
    > description $ETH-SW-LAUNCH$$INTF-INFO-HWIC
    >
    4ESW$$ES_LAN$$FW_INSIDE$
    >
    > ip address 10.1.2.1
    255.255.255.0
    > no ip redirects
    > no ip unreachables
    > no ip proxy-arp
    > ip route-cache flow
    > ip tcp adjust-mss 1452
    > !
    > interface Dialer0
    > ip address 192.168.1.2
    > 255.255.255.0
    > no ip redirects
    > no ip unreachables
    > no ip proxy-arp
    > encapsulation ppp
    > ip route-cache flow
    > dialer pool 1
    > dialer-group 1
    > no cdp enable
    > !
    > ip route 0.0.0.0 0.0.0.0 Dialer0
    > !
    > ip http server
    > ip http authentication local
    > ip http secure-server
    > ip http timeout-policy idle 60 life 86400 requests
    > 10000
    > !
    > logging trap debugging
    > dialer-list 1 protocol ip permit
    > no cdp run
    > !
    > !
    > !
    > control-plane
    > !
    > banner login ^CAuthorized access
    > only!
    > Disconnect IMMEDIATELY if you are not an authorized user!
    > ^C
    > !
    > line con 0
    > login local
    > no modem enable
    > transport output telnet
    > line aux 0
    > login local
    > transport output telnet
    > line vty 0 4
    > privilege level 15
    > login local
    > transport input telnet ssh
    > !
    > scheduler max-task-time 5000
    > scheduler allocate 4000 1000
    > scheduler interval 500
    > !
    > webvpn context Default_context
    > ssl authenticate verify all
    > !
    > no inservice
    > !
    > end
    >
--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 
Received on Thu Aug 3 12:35:58 2006

This archive was generated by hypermail 2.1.8 : Thu Aug 03 2006 - 12:35:58 EEST


Sponsor: Ilker Temir