[cisco-ttl] Konfigurasyon save edilmiyor

From: Tayfun Tuna <tayfun.tuna_at_....>
Date: Mon Mar 27 2006 - 11:19:49 EEST

merhaba arkadaslar,  

bir routerda degisiklik yaptiktan sonra save ederken asagidaki sorunla karsilastim. yapabilecegim birsey var mi, Cisco sayfasi da dahil olma uzere pek bisey bulamadim. yardimci olabilirseniz sevinirim  

---

FONBR2-B1#copy running-config startup-config Destination filename [startup-config]?
Building configuration...  

% Configuration buffer full, can't add command: source-ipaddr 10.22.8.50 %Aborting Save. Compress the config.[OK]    

FONBR2-B1#wr
Building configuration...  

% Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram. Continue? [no]: yes
% Configuration buffer full, can't add command: source-ipaddr 10.22.8.50 %Aborting Save. Compress the config.[OK]

---

FONBR2-B1#dir nvram:
Directory of nvram:/  

    3  -rw-       24713                    <no date>  startup-config
    4  ----          27                    <no date>  private-config
 

29688 bytes total (4896 bytes free)    

FONBR2-B1#sh ver
Cisco IOS Software, C1700 Software (C1700-SY7-M), Version 12.3(4)T4, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2004 by Cisco Systems, Inc. Compiled Thu 11-Mar-04 18:28 by eaarmas  

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)  

FONBR2-B1 uptime is 6 weeks, 3 days, 20 hours, 50 minutes System returned to ROM by power-on
System restarted at 00:24:26 NZDT Fri Feb 10 2006 System image file is "flash:c1700-sy7-mz.123-4.T4.bin" Network configuration file is "tftp://192.161.128.24/addpriv.cfg"  

Cisco 1721 (MPC860P) processor (revision 0x400) with 57417K/8119K bytes of memory.
Processor board ID FOC08502Y8P (2796313106), with hardware revision 0000 MPC860P processor: part number 5, mask 2 1 FastEthernet interface
1 Serial(sync/async) interface
32K bytes of NVRAM.
32768K bytes of processor board System flash (Read/Write)  

Configuration register is 0x2102  

Tayfun

This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links



<*> To visit your group on the web, go to:

    http://groups.yahoo.com/group/cisco-ttl/



<*> To unsubscribe from this group, send an email to:

    cisco-ttl-unsubscribe@yahoogroups.com



<*> Your use of Yahoo! Groups is subject to:

    http://docs.yahoo.com/info/terms/
 

Received on Mon Mar 27 11:31:13 2006