Cisco Teknik Tartisma Listesi Arsivi: [cisco-ttl] Re: G.SHDSL -

From: Ali Tursun <ali_tursun2002_at_....>
Date: Mon Mar 13 2006 - 22:03:40 EET

Merhaba Ýlker Bey,

Cisco 878 (ATM) ve karþýsýndaki Interface altýna " ip ospf mtuâˆ’ignore" komutu girdik ve sorun çözüldü.

Çok teþekkür ederim.

iyi çalýþmalar

Ali Tursun

In cisco-ttl@yahoogroups.com, Ilker Temir <ilker@...> wrote:
>
> MTU sorunu gibi gorunuyor ama gerekli ciktilarin tamamini
> gondermemissiniz. Her iki routerdan da
>
> show int
> show ip ospf int
> show ip ospf nei
> debug ip ospf adj
> konfigurasyonun ilgili kismi
>
> gondermeniz yararli olur.
>
> Ilker
>
> Ali Tursun wrote:
> > Merhaba Ýlker Bey,
> >
> > Cisco 878'deki config aþaðýdaki gibidir.
> >
> > controller DSL 0
> > mode atm
> > line-term cpe
> > line-mode 2-wire line-zero
> > dsl-mode shdsl symmetric annex B
> > line-rate auto
> >
> > interface Loopback0
> > ip address 192.168.10.78 255.255.255.255
> >
> > interface ATM0
> > description ********GSHDSL******
> > no ip address
> > no atm ilmi-keepalive
> > !
> > interface ATM0.1 point-to-point
> > ip address 172.16.26.2 255.255.255.252
> > ip ospf message-digest-key 1 md5 RdRIefJgmjqgaHyY
> > ip ospf cost 390
> > pvc 0 0/35
> > vbr-nrt 256 256
> > encapsulation aal5snap
> >
> > interface Vlan1
> > description ******LAN ******
> > ip address 10.35.112.254 255.255.248.0
> > ip tcp adjust-mss 1452
> > ip ospf message-digest-key 1 md5 RdRIefJgmjqgaHyY
> > ip ospf cost 1
> > !
> > router ospf 1
> > log-adjacency-changes
> > area 1 authentication message-digest
> > area 1 stub no-summary
> > network 10.35.112.0 0.0.7.255 area 1
> > network 172.16.26.0 0.0.0.3 area 1
> > network 192.168.10.78 0.0.0.0 area 1
> > !
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 172.16.26.1
> >
> > ******************************************
> >
> > OSPF Log çýktýsý
> >
> > ******************************************
> >
> > OSPF adjacency events debugging is on
> > Cinarli_Ofis#
> > *Mar 31 05:52:36.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
> > 0x1672 opt 0x50 flag 0x7 len 32
> > *Mar 31 05:52:36.463: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:36.463: OSPF: Retransmitting DBD to 192.168.10.11 on
> > ATM0.1 [6]
> > *Mar 31 05:52:38.975: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
> > 0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
> > *Mar 31 05:52:38.975: OSPF: First DBD and we are not SLAVE
> > *Mar 31 05:52:39.095: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:41.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
> > 0x1672 opt 0x50 flag 0x7 len 32
> > *Mar 31 05:52:41.463: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:41.463: OSPF: Retransmitting DBD to 192.168.10.11 on
> > ATM0.1 [7]
> > *Mar 31 05:52:43.875: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:43.983: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
> > 0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
> > *Mar 31 05:52:43.983: OSPF: First DBD and we are not SLAVE
> > *Mar 31 05:52:46.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
> > 0x1672 opt 0x50 flag 0x7 len 32
> > *Mar 31 05:52:46.463: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:46.463: OSPF: Retransmitting DBD to 192.168.10.11 on
> > ATM0.1 [8]
> > *Mar 31 05:52:48.991: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
> > 0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
> > *Mar 31 05:52:48.991: OSPF: First DBD and we are not SLAVE
> > *Mar 31 05:52:49.095: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:51.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
> > 0x1672 opt 0x50 flag 0x7 len 32
> > *Mar 31 05:52:51.463: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:51.463: OSPF: Retransmitting DBD to 192.168.10.11 on
> > ATM0.1 [9]
> > *Mar 31 05:52:53.875: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:53.991: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
> > 0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
> > *Mar 31 05:52:53.991: OSPF: First DBD and we are not SLAVE
> > *Mar 31 05:52:56.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
> > 0x1672 opt 0x50 flag 0x7 len 32
> > *Mar 31 05:52:56.463: OSPF: Send with youngest Key 1
> > *Mar 31 05:52:56.463: OSPF: Retransmitting DBD to 192.168.10.11 on
> > ATM0.1 [10]
> > *Mar 31 05:52:58.991: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
> > 0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
> > *Mar 31 05:52:58.995: OSPF: First DBD and we are not SLAVE
> > *Mar 31 05:52:59.095: OSPF: Send with youngest Key 1
> > *Mar 31 05:53:01.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
> > 0x1672 opt 0x50 flag 0x7 len 32
> > *Mar 31 05:53:01.463: OSPF: Send with youngest Key 1
> > *Mar 31 05:53:01.463: OSPF: Retransmitting DBD to 192.168.10.11 on
> > ATM0.1 [11]
> > *Mar 31 05:53:03.875: OSPF: Send with youngest Key 1
> > *Mar 31 05:53:03.995: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
> > 0x1229 opt 0x50 flag 0x7 len 32 mtu
> >
> >
> >
> >
> > --- In cisco-ttl@yahoogroups.com, Ilker Temir ilker@ wrote:
> >
> >>Telekomla bir ilgisi olamaz, ayar hatasi olmali. OSPF, EIGRP'ye gore
> >>ayarlar konusunda daha hassastir, MTU uyumu gerekir, interface'lere
> >
> > gore
> >
> >>durum degisik olabilir vb.
> >>
> >>"debug ip ospf adj" buyuk ihtimalle hatanin nerede oldugunu dogrudan
> >>soyleyecektir. Eger boyle cozulmez ise asagidaki ciktilari OSPF'i
> >>konfigure ettikten sonra gonderin.
> >>
> >>show ip ospf nei
> >>show ip ospf int
> >>debug ip ospf adj
> >>
> >>bir de iki router'daki ospf konfigurasyonlari yararli olur.
> >>
> >>Ilker
> >>
> >>Ali Tursun wrote:
> >>
> >>>Merhaba Arkadaþlar,
> >>>
> >>>2 durum var.
> >>>2 lokasyon arasýnda G.SHDSL hat üzerinde Cisco 878'ler ile
> >
> > OSPF
> >
> >>>çalýþtýrmak
> >>>1 taraf G.SHDSL (878)diðer taraf ise ATM (Cisco 7206'da).Yani
> >>>G.SHDSL'i ATM'de sonlandýrýyorum.
> >>>
> >>>Bu 2 örnek'dede EIGRP çalýþýyor hiç sorun yok.Ama OSPF
> >
> > çalýþmýyor.
> >
> >>>Bu arada cisco 878'leri back-to-back baðlayýnca OSPF
> >
> > çalýþýyor( Bir
> >
> >>>taraf CPE diper taraf CO)
> >>>
> >>>Bu konuda tecrübesi olan varmýdýr ?.SOrun OSPF config'inde
> >
> > bir
> >
> >>>trik''mi yoksa Telekom'da özel bir trik'mi ?
> >>>
> >>>iyi çalýþmalar dilerim
> >>>
> >>>Ali Tursun
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>--
> >>>Cisco Teknik Tartisma Listesi (Cisco-ttl)
> >>>
> >>>Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk
> >>>kullaniciya aittir. Liste yoneticileri, oneride bulunan liste
> >
> > uyeleri ya da
> >
> >>>bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu
> >
> > tutulamazlar.
> >
> >>>Yahoo! Groups Links
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> >
> >
> > --
> > Cisco Teknik Tartisma Listesi (Cisco-ttl)
> >
> > Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk
> > kullaniciya aittir. Liste yoneticileri, oneride bulunan liste
uyeleri ya da
> > bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu
tutulamazlar.
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>

[Non-text portions of this message have been removed]

--
Cisco Teknik Tartisma Listesi (Cisco-ttl)

Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk 
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da 
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar. 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/cisco-ttl/

<*> To unsubscribe from this group, send an email to:
    cisco-ttl-unsubscribe@yahoogroups.com

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

Received on Tue Mar 14 00:40:43 2006

This archive was generated by hypermail 2.1.8 : Tue Mar 14 2006 - 00:40:44 EET

[cisco-ttl] Re: G.SHDSL - Cicso 878 - OSPF Problemi