Merhaba İlker Bey,
Cisco 878'deki config aşağıdaki gibidir.
controller DSL 0
mode atm
line-term cpe
line-mode 2-wire line-zero
dsl-mode shdsl symmetric annex B
line-rate auto
interface Loopback0
ip address 192.168.10.78 255.255.255.255
interface ATM0
description ********GSHDSL******
no ip address
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
ip address 172.16.26.2 255.255.255.252
ip ospf message-digest-key 1 md5 RdRIefJgmjqgaHyY
ip ospf cost 390
pvc 0 0/35
vbr-nrt 256 256
encapsulation aal5snap
interface Vlan1
description ******LAN ******
ip address 10.35.112.254 255.255.248.0
ip tcp adjust-mss 1452
ip ospf message-digest-key 1 md5 RdRIefJgmjqgaHyY
ip ospf cost 1
!
router ospf 1
log-adjacency-changes
area 1 authentication message-digest
area 1 stub no-summary
network 10.35.112.0 0.0.7.255 area 1
network 172.16.26.0 0.0.0.3 area 1
network 192.168.10.78 0.0.0.0 area 1
!
ip classless
ip route 0.0.0.0 0.0.0.0 172.16.26.1
OSPF Log çıktısı
OSPF adjacency events debugging is on
Cinarli_Ofis#
*Mar 31 05:52:36.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
0x1672 opt 0x50 flag 0x7 len 32
*Mar 31 05:52:36.463: OSPF: Send with youngest Key 1
*Mar 31 05:52:36.463: OSPF: Retransmitting DBD to 192.168.10.11 on
ATM0.1 [6]
*Mar 31 05:52:38.975: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
*Mar 31 05:52:38.975: OSPF: First DBD and we are not SLAVE
*Mar 31 05:52:39.095: OSPF: Send with youngest Key 1
*Mar 31 05:52:41.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
0x1672 opt 0x50 flag 0x7 len 32
*Mar 31 05:52:41.463: OSPF: Send with youngest Key 1
*Mar 31 05:52:41.463: OSPF: Retransmitting DBD to 192.168.10.11 on
ATM0.1 [7]
*Mar 31 05:52:43.875: OSPF: Send with youngest Key 1
*Mar 31 05:52:43.983: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
*Mar 31 05:52:43.983: OSPF: First DBD and we are not SLAVE
*Mar 31 05:52:46.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
0x1672 opt 0x50 flag 0x7 len 32
*Mar 31 05:52:46.463: OSPF: Send with youngest Key 1
*Mar 31 05:52:46.463: OSPF: Retransmitting DBD to 192.168.10.11 on
ATM0.1 [8]
*Mar 31 05:52:48.991: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
*Mar 31 05:52:48.991: OSPF: First DBD and we are not SLAVE
*Mar 31 05:52:49.095: OSPF: Send with youngest Key 1
*Mar 31 05:52:51.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
0x1672 opt 0x50 flag 0x7 len 32
*Mar 31 05:52:51.463: OSPF: Send with youngest Key 1
*Mar 31 05:52:51.463: OSPF: Retransmitting DBD to 192.168.10.11 on
ATM0.1 [9]
*Mar 31 05:52:53.875: OSPF: Send with youngest Key 1
*Mar 31 05:52:53.991: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
*Mar 31 05:52:53.991: OSPF: First DBD and we are not SLAVE
*Mar 31 05:52:56.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
0x1672 opt 0x50 flag 0x7 len 32
*Mar 31 05:52:56.463: OSPF: Send with youngest Key 1
*Mar 31 05:52:56.463: OSPF: Retransmitting DBD to 192.168.10.11 on
ATM0.1 [10]
*Mar 31 05:52:58.991: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
0x1229 opt 0x50 flag 0x7 len 32 mtu 1500 state EXSTART
*Mar 31 05:52:58.995: OSPF: First DBD and we are not SLAVE
*Mar 31 05:52:59.095: OSPF: Send with youngest Key 1
*Mar 31 05:53:01.463: OSPF: Send DBD to 192.168.10.11 on ATM0.1 seq
0x1672 opt 0x50 flag 0x7 len 32
*Mar 31 05:53:01.463: OSPF: Send with youngest Key 1
*Mar 31 05:53:01.463: OSPF: Retransmitting DBD to 192.168.10.11 on
ATM0.1 [11]
*Mar 31 05:53:03.875: OSPF: Send with youngest Key 1
*Mar 31 05:53:03.995: OSPF: Rcv DBD from 192.168.10.11 on ATM0.1 seq
0x1229 opt 0x50 flag 0x7 len 32 mtu
- In cisco-ttl@yahoogroups.com, Ilker Temir <ilker@...> wrote:
>
> Telekomla bir ilgisi olamaz, ayar hatasi olmali. OSPF, EIGRP'ye gore
> ayarlar konusunda daha hassastir, MTU uyumu gerekir, interface'lere
gore
> durum degisik olabilir vb.
>
> "debug ip ospf adj" buyuk ihtimalle hatanin nerede oldugunu dogrudan
> soyleyecektir. Eger boyle cozulmez ise asagidaki ciktilari OSPF'i
> konfigure ettikten sonra gonderin.
>
> show ip ospf nei
> show ip ospf int
> debug ip ospf adj
>
> bir de iki router'daki ospf konfigurasyonlari yararli olur.
>
> Ilker
>
> Ali Tursun wrote:
> > Merhaba Arkadaşlar,
> >
> > 2 durum var.
> > 2 lokasyon arasında G.SHDSL hat üzerinde Cisco 878'ler ile
OSPF
> > çalıştırmak
> > 1 taraf G.SHDSL (878)diğer taraf ise ATM (Cisco 7206'da).Yani
> > G.SHDSL'i ATM'de sonlandırıyorum.
> >
> > Bu 2 örnek'dede EIGRP çalışıyor hiç sorun yok.Ama OSPF
çalışmıyor.
> > Bu arada cisco 878'leri back-to-back bağlayınca OSPF
çalışıyor( Bir
> > taraf CPE diper taraf CO)
> >
> > Bu konuda tecrübesi olan varmıdır ?.SOrun OSPF config'inde
bir
> > trik''mi yoksa Telekom'da özel bir trik'mi ?
> >
> > iyi çalışmalar dilerim
> >
> > Ali Tursun
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > --
> > Cisco Teknik Tartisma Listesi (Cisco-ttl)
> >
> > Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk
> > kullaniciya aittir. Liste yoneticileri, oneride bulunan liste
uyeleri ya da
> > bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu
tutulamazlar.
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
[Non-text portions of this message have been removed]
--
Cisco Teknik Tartisma Listesi (Cisco-ttl)
Bu listede onerilen degisikliklerin uygulanmasindaki tum sorumluluk
kullaniciya aittir. Liste yoneticileri, oneride bulunan liste uyeleri ya da
bu uyelerin calistigi kuruluslar herhangi bir sekilde sorumlu tutulamazlar.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/cisco-ttl/
<*> To unsubscribe from this group, send an email to:
cisco-ttl-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Thu Mar 9 16:13:27 2006