Next message: Besir KAYAR: "Re: [cisco-ttl] dialbackup( watch) problemi"
Merhaba,
dial watch yöntemi ile dial backup konf. yapmak istiyorum.Bir serial int.e backup olarak dial -up ile asenkron int. kullaniyorum.
Ancak serial int. up iken dahi backup int.stanby degil durumuda up görülüyo. sadace ip atanmamis durumda .
#sh ip int br
Interface IP-Address OK? Method Status Protocol
Async65 unassigned YES IPCP up up
Bu durumdayhen, watched networküm erisilemez oldugu anda backup interface baglaniyor ve çalismaya basliyor ancak network tekarr up
oldugu anda backup interface im devreyi koparmayip bagli kaliyor.
Bu konuda fikir verebilriseniz sevirim
iyi çalismalar.
ceyhun
conf..
!
interface Serial0/0
ip address 192.168.10.0 255.255.255.0
interface Async65
ip address negotiated
encapsulation ppp
dialer in-band
dialer idle-timeout 60
dialer fast-idle 10
dialer enable-timeout 10
dialer watch-disable 15
dialer string cevir
dialer watch-group 8
dialer-group 1
async default routing
async mode interactive
ppp pap sent-username **** password 0 *******
router eigrp 10
redistribute connected
redistribute static
network 192.168.10.0
network 172.16.1.0(as65 interface network)
auto-summary
no eigrp log-neighbor-changes
access-list 101 remark Define Interesting Traffic
access-list 101 deny eigrp any any
access-list 101 permit ip any any
dialer watch-list 8 ip 10.0.0.0 255.255.255.0
dialer-list 1 protocol ip list 101
This archive was generated by hypermail 2.1.5
: Mon Apr 12 2004 - 10:54:16 GMT