Re: [cisco-ttl] dial-backup sorunu
From: Devrim Yener Kucuk (dkucuk_at_cisco.com)
Date: Sat Feb 07 2004 - 09:48:09 GMT
Next message: Devrim Yener Kucuk: "[cisco-ttl] Re: ISDN BRI callback"
Selam Yalcin
Bu sorun cozuldu mu?
Devrim
Yalcin ERDEM wrote:
> Mrb arkadaşlar
>
> usrobotics modemle yaptığım dial backupda serial0 down olduğunda
> serial1 line modem e bağlanıyor. Dialer stringi çeviriyor. Dialer
> stringi çevirdikten sonra bağlantı kuramıyor. ( kendi bilgisayarımdaki
> modemle bu username ve passwordle bağlanabiliyorum) neden
> kaynaklanabilir?
>
> Aldığım hata :
>
> 2d03h: Se1 DDR: disconnecting call
>
> 2d03h: TTY2: Modem command: --AT&F&C1&D2S0=1H0--
>
> 2d03h: TTY2: Modem configuration succeeded
>
> 2d03h: TTY2: Detected modem speed 115200
>
> 2d03h: TTY2: Done with modem configuration
>
> 2d03h: Se1 DDR: re-enable timeout
>
> 2d03h: Se1 DDR: Dialing cause ip (s=*.*.*.*, d=*.*.*.*)
>
> 2d03h: Se1 DDR: Attempting to dial 0822**********
>
> 2d03h: CHAT2: Attempting async line dialer script
>
> 2d03h: CHAT2: Dialing using Modem script: usr & System script: none
>
> 2d03h: CHAT2: process started
>
> 2d03h: CHAT2: Asserting DTR
>
> 2d03h: CHAT2: Chat script usr started
>
> 2d03h: CHAT2: Chat script usr finished, status = Connection timed out;
> remote ho
>
> st not responding
>
> konfigurasyonum:
>
> chat-script usr ABORT ERROR ABORT BUSY "" "ATZ" OK "ATDT 0822********"
> TIMEOUT
>
> "CONNECT"\n line 2 modem autoconfigure type usr
>
> modemcap entry usr:MSC=&FSO=1
>
> !
>
> !
>
> !
>
> interface FastEthernet0
>
> description connected to EthernetLAN
>
> ip address * * * *
>
> speed auto
>
> !
>
> interface Serial0
>
> description connected to Internet
>
> backup delay 5 5
>
> backup interface Serial1
>
> ip address * * * *
>
> ip access-group 2 in
>
> no fair-queue
>
> !
>
> interface Serial1
>
> physical-layer async
>
> ip address negotiated
>
> encapsulation ppp
>
> no ip route-cache
>
> dialer in-band
>
> dialer idle-timeout 1800
>
> dialer string usr
>
> dialer-group 1
>
> async dynamic routing
>
> async mode interactive
>
> no peer default ip address
>
> ppp pap sent-username username password 7 00071B0F164B0E145D73
>
> !
>
> router rip
>
> version 2
>
> passive-interface Serial0
>
> network *.*.*.*
>
> no auto-summary
>
> !
>
> ip classless
>
> ip route 0.0.0.0 0.0.0.0 Serial0
>
> ip route 0.0.0.0 0.0.0.0 Serial1 100
>
> no ip http server
>
> !
>
> line con 0
>
> exec-timeout 0 0
>
> password cmaker
>
> login
>
> line 2
>
> exec-timeout 0 0
>
> script dialer usr
>
> modem InOut
>
> modem autoconfigure discovery
>
> autocommand ppp
>
> transport preferred telnet
>
> transport input all
>
> stopbits 1
>
> speed 115200
>
> flowcontrol hardware
>
> line aux 0
>
> line vty 0 4
>
> password 7 00071B0F16
>
> login
>
> !
>
> no scheduler allocate
>
> end
>
> Bu listenin Cisco Systems ile dogrudan herhangi bir baglantisi
> bulunmamaktadir.
>
> Listeden cikmak için cisco-ttl-unsubscribe_at_yahoogroups.com adresine
> bir e-posta gönderebilirsiniz.
>
>
> ---------------------------------------------------------------
> Yahoo! Groups Links
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/cisco-ttl/
>
> * To unsubscribe from this group, send an email to:
> cisco-ttl-unsubscribe_at_yahoogroups.com
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
This archive was generated by hypermail 2.1.5
: Sat Feb 07 2004 - 13:48:57 GMT
|